Abstract:Experimental study was carried out on the in-plane bending behavior of glass plates without lateral supports, and the effects of the factors, such as height-to-span ratio, on the stability of glass panels were studied. Results show that the in-plane bending glass plates with both ends simply supported and their upper edge free lose overall stability under loads, which belongs to the limit-point type of instability. It is found that the buckling load increases linearly with the increase of height-to-span ratio of the glass plates. The lateral stress of in-plane bending glass plates without lateral supports increases linearly under loads; while the large-area stress increases nonlinearly and the lateral stress is not the controlling factor of instability. In finite element analysis, the first buckling mode is regarded as the initial imperfection and imposed on the model as 1/1000 of the span of the components. The numerical buckling load according to the theory of large deflection is less than the experiment result, which is more conservative and can provide some reference for design. For the design method, when the in-plane load is imposed on the glass plate, its lateral strength and the deflection should be verified. Considering the stability of the in-plane bending glass plate without reliable lateral support, buckling is another possible failure mode and calls for verification.

LOADING CAPACITY AND STRENGTHENING METHODS OF GLASS RIB IN GLASS CURTAIN WALL

TEST & ANALYSIS OF IN-PLANE FLEXURAL BEHAVIORS OF STRENGTHENED GLASS RIBS FOR ALL-GLASS CURTAIN WALL

An approach of improving strength and robustness of glass: Pre-stressed glass structure

In-plane bending of laminated glass fin strengthened through external bonding

EXPERIMENTAL STUDY ON BEHAVIOR OF IN-PLANE BENDING GLASS PLATE RIB REINFORCED BY STEEL STRAP

Experimental Study on Reinforcing Capacity of the In-plane Bending Glass Plate Rid

Analysis on loading capacity of six point-supported glass panel

Bearing Capacity of Tempered Glass Panel in Point Supported Glass Facades Against In-Plane Load

Finite Element Analysis of Bearing Properties of In-plane Bending Glass Plate

Experimental Study of the Carrying Capacity of Point-Supported Glass Panels Subjected to Loads in the Panel Plane

Finite Element Analysis on Bending Resistance of Six Point-Supported Glass Panels

ANALYSIS OF BEARING PROPERTIES OF FOUR POINT-SUPPORTING GLASS PLATE IN POINT-SUPPORT GLAZING BUILDING

Influence Of The Glass Mass On Dynamic Performance Of Point Supported Glass Curtain Wall Flexible Supporting System

Experimental Test on Loading Capability of Glass Panels with Overlapped Connectors

Flexural Behavior of In-Plane Bending Glass Structures for Design Method

Finite Element Analysis of Load-Carrying Capacity for Glass Curtain Walls with Invisible Single Cables

Experimental Investigation into In-Plane Bearing Capability of Single-Layer Glass Panels with Overlapped Connectors

Test of Loading Capacity for Glass Curtain Wall with an Invisible Single Cable

Experimental study on mechanical properties of sandwich tempered glass unidirectional composite laminate

An Experimental Study on the Structural Behaviour of Laminated Glass Members under Combined Axial Compression and In-Plane Bending

FAILURE STRESS ANALYSIS AROUND THE HOLE IN POINT-SUPPORTED GLASS PANELS