Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The critical problem in accurately characterising the defects in nickel-based alloy weld is the skewing of the ultrasonic beam due to the heterogeneity. This article aims to address this problem by utilising microstructure analysis and mode techniques to account for the skewing of the ultrasonic beam and the formation of root signals in the weld. The macroscopic and microscopic metallography of the weld is quantitatively described, focusing on the GH3535 alloy weld. The mean grain size of the base metal and the weld are 60 and 400 μm, respectively. The local crystal orientation map of the weld is obtained using the electron backscatter diffraction technique, revealing a preferred orientation of the grains in the direction. The propagation of the ultrasonic beam in GH3535 alloy weld was visualised by CIVA software. The beam's degree of skewing and splitting is related to the grain's angle of orientation difference. Phased array ultrasonic tests were conducted using a 64 L linear array probe with a centre frequency of 2.25 MHz to inspect the weld and side-drilled holes with a diameter of 3 mm. The echo signals from side-drilled holes in different depths were analysed in both the simulation and tests. The quantitative deviation of depth at the centre and lower end of the weld is 2.6% and 6%. The signal–noise ratio of the side-drilled holes in the weld in the test is 12.5–15.8 dB. The root signals were observed in the weld but not in the base metal. The forming mechanism of the root signal was elucidated by analysing the vertical orientation of the grains.

Ultrasonic testing and locating study of tiny defects in aluminum alloy sheet joints

Automatic Defect Recognition for Phased Array Ultrasonic Inspection ofPolyolefin Electro-fusion Joint

Signal Characteristic of Ultrasonic TOFD Testing for Aluminum Alloy Weld

Auto Ultrasonic Testing of the Micro Defects Close to the Surface in the T-Shaped Laser Welding Joint

Ultrasonic non-destructive evaluation study of molecular diffusion bonding of thin copper-aluminum electrode sheets

Ultrasonic nondestructive evaluation of electron beam weld with complex structure

Research on Detection of Small Defects of Aluminum Plates Based on Electromagnetic Ultrasonic Lamb Wave

Research progress in ultrasonic testing for friction stir welding of aluminum alloy

Ultrasonic Tofd Testing for Aluminum Alloy Weld of Thick Plate

Ultrasonic nondestructive testing of braze defects

Testing surface crack defects of sheet metal with ultrasonic lock-in thermography

A novel technique for improving of ultrasonic TOFD data

A Review of Ultrasonic Testing Applications in Spot Welding: Defect Evaluation in Experimental and Simulation Results

Microstructure quantification and phased array ultrasonic inspection of GH3535 alloy weld

Effects Of Uneven Surface On Ultrasonic Testing Results Of T-Shape Joint

Comparison on Ultrasonic Testing for T-Shape Welded Joints in the Steel Structures

Numerical Simulation of Laser Ultrasound Detection of Small Defect in Metal Plates

Analyzing and Experiment of Ultrasonic Field with Immersion Focusing Ultrasonic Test in Angle Beam Incidence

Ultrasonic Fast Identification for Faulty Welded Joint Defects of Auto-Body Spot Welding

Ultrasonic Low-Frequency Resonant Test of Spot Welding of Zinc-Coated Steel Sheet

Analysis on Ultrasonic TOFD Imaging Testing for Ultra-thick-walled EBW Joint of Aluminum Alloy