Abstract:Based on the analytical solution of Crouch to the problem of a constant discontinuity in displacement over a finite line segment in an infinite elastic solid, in the present paper, the crack-tip displacement discontinuity elements, which can be classified as the left and the right crack-tip elements, are presented to model the singularity of stress near a crack tip. Furthermore, the crack-tip elements together with the constant displacement discontinuity elements presented by Crouch and Starfied are used to develop a numerical approach for calculating the stress intensity factors (SIFs) of general plane cracks. In the boundary element implementation, the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. The method is called the hybrid displacement discontinuity method (HDDM). Numerical examples are given and compared with the available solutions. It can be found that the numerical approach is simple, yet very accurate for calculating the SIFs of branched cracks. As a new example, cracks emanating from a rhombus hole in an infinite plate under biaxial loads are taken into consideration. The numerical results indicate the efficiency of the present numerical approach and can reveal the effect of the biaxial load on the SIFs. In addition, the hybrid displacement discontinuity method together with the maximum circumferential stress criterion (Erdogan and Sih) becomes a very effective numerical approach for simulating the fatigue crack propagation process in plane elastic bodies under mixed-mode conditions. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the HDDM. Crack propagation is simulated by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented.

The Axial Stress Intensity Factors in Autofrettaged Cylinders with External Hoop Cracks

Stress Intensity Factors for Cracked Cold-drawnSteel Wires under Tensile Loading

Numerical Analysis of the Stress Intensity Factor for Two Kinds of Mixed-Mode Crack Specimens

An Improved Crack-Tip Element Treatment for Advanced FEMs

An Effective Method of Stress Intensity Factor Calculation for Cracks Emanating from A Triangular or Square Hole under Biaxial Loads

Fatigue Evaluation of Autofrettaged Thick-Walled Cylinders with a Radial Cross-Bore

An Accurate and Efficient Augmented Finite Element Method for Arbitrary Crack Interactions

Internal Stress Distribution and Cracking Around Flaws and Openings of Rock Block under Uniaxial Compression: A Particle Mechanics Approach

An Efficient and Accurate Numerical Method of Stress Intensity Factors Calculation of a Branched Crack

Numerical Analysis of Stress Intensity Factor for Semi-Elliptical Crack on Cylinder Surface

Stress Intensity Factors of Three Point Bending and Shear Specimen

A numerical analysis of stress intensity factors for cracks emanating from an elliptical hole in a rectangular plate under biaxial loads

A Numerical Analysis of Stress Intensity Factors at Bifurcated Cracks

Research on the stress intensity factor calculation of multi-elliptical hole-edge crack

FM-BEM Evaluation for Effective Elastic Moduli of Microcracked Solids

Weight Function of Stress Intensity Factor for Single Radial Crack Emanating from Hollow Cylinder

Weight Function Method for Stress Intensity Factor of Internal Surface Semi-elliptical Crack in Elliptical Holes

3D BE Analysis on Stress Intensity Factor of a Fatigue Crack in a Welded T-joint

Numerical Simulation of Stress Intensity Factor under Multiaxial Loading

Numerical Determination on Effective Elastic Moduli of 3-D Solid with A Large Number of Microcracks Using Fm-Dbem

Three-dimensional weight function analyses and stress intensity factors for two eccentric and asymmetric surface cracks and surface-corner cracks at a circular hole