Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

THE EMBEDDED-ZONE MODEL OF COMPUTING THE TRANSVERSE ELASTIC PROPERTIES OF UNIDIRECTIONAL FIBER-REINFORCED COMPOSITE EMBEDDED A GREAT AMOUNT OF STOCHASTICALLY-DISTRIBUTING FINE FIBERS

High‐fidelity Random Fiber Distribution Algorithm Based on Fiber Spreading Process

Elastoplastic Analysis with Fine Beam Model of Vector Form Intrinsic Finite Element

A FIBER BEAM ELEMENT FOR THE FINITE PARTICLE METHOD CONSIDERING SHEAR AND TORSION DEFORMATON

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

Modeling of Interphases in Fiber-Reinforced Composites under Transverse Loading Using the Boundary Element Method

Meso-scale characterization and discrete element simulation of fiber-reinforced resin-mineral composite

On micromechanics approach to stiffness and strength of unidirectional composites

3D Computational Grains with Embedded Fibers for the Direct Micromechanical Modeling of Fiber Composites

Large Scale Analysis of Mechanical Properties in 3-D Fiber-Reinforced Composites Using a New Fast Multipole Boundary Element Method

Multiscale simulation and theoretical prediction for the elastic properties of unidirectional fiber‐reinforced polymer containing random void defects

Finite Element Modeling of Mechanical Properties of 3D Five-Directional Rectangular Braided Composites

Modeling the effective elastic and viscoelastic properties of randomly distributed short fiber reinforced composites

3-D Elastic Analysis of Stress Transference Mechanism at the Interfaces in Fiber Reinforced Concrete

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions

The mechanics of elastomeric sheet reinforced with bidirectional fiber mesh subjected to flexure on boundaries

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Beam element method for mechanical analysis of 2.5D woven composite: Modeling strategy and finite element method simulation

Embedded Cell Model of Three-Dimensional Two-Phase Composites

A field-enriched finite element method for crack propagation in fiber-reinforced composite lamina without remeshing