Abstract:In this study, the morphologies of three types of acrylonitrilebutadiene rubber (NBR)/polypropylene (PP) thermoplastic vulcanizates (TPVs) (with an NBR/PP blend ratio of 70/30) were compared. The TPVs were (1) an ultrafine fully vulcanized acrylonitrilebutadiene rubber (UFNBR)/PP TPV made by the mechanical blending of UFNBR with PP, (2) a dynamically vulcanized NBR/PP TPV without the compatibilization of maleic anhydride grafted polypropylene (MP) and amine-terminated butadieneacrylonitrile copolymer (ATBN), and (3) a dynamically vulcanized NBR/PP TPVs with the compatibilization of MP and ATBN. The influence of the compatibility therein on the size of the dispersed vulcanized NBR particles and the crystallization behavior of the PP in the TPVs and the resultant properties are also discussed. As indicated by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, polarizing microscopy, dynamic mechanical thermal analysis, and rheological and mechanical testing, the compatibility was significantly improved by the reactive compatibilization of MP and ATBN, which led to a uniform and fine morphology. The compatibilization increased the crystallization rate and reduced the size of the spherulites of PP. On the other hand, it was found that the dispersed vulcanized NBR particles lowered the degree of crystallinity. The better the compatibility of the blend was, the lower the degree of crystallinity and the storage modulus were, but the higher the loss factor and the processing viscosity were. All TPVs showed almost the same oil resistance, but the TPV prepared with reactive compatibilization had the best mechanical properties. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Effect of Compatibilizers on Β-Nucleation of Β-Pp

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Non-isothermal Crystallization Behavior of Compatibilized Polypropylene/recycled Polyethylene Terephthalate Blends

Effects of Α and Β Nucleating Agent Compounds on Properties of Polypropylene

Dramatic Influence of Compatibility on Crystallization Behavior and Morphology of Polypropylene in NBR/PP Thermoplastic Vulcanizates

Study on NBR/PP Blend Compatiblized by TETA/MP/XNBR

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Effect of Addition of Pp-G- (Gma-Co-st) on Morphologies and Properties of Pbt/Pp Blends

Effect of compatibilizers on dynamic vulcanized chlorinated butyl rubber/polyamide 12 thermoplastic elastomers

Study on Compatibilization of New Melt Graft Copolymer on PP／PA6 Blend

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

Effect of Compatibilizer on the Structure and Property of Polycarbonate/polypropylene Alloys

Effect of Compatibilizer on the Mechanical Property and Morphostructure of ABS/PBT Blends

Crystallization, melting behavior, and morphology of PP/Novolac blends

Effect of the Compatibility on the Morphology and Properties of Acrylonitrile–butadiene Rubber/polypropylene Thermoplastic Vulcanizates

Study on Compatibilization of Polyurethane Prepolymer on PP/PA6 Blend

Compatibility and Low Temperature Impact Property of PP/PP-g-PA6/PA6 Blends

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Study On Crystallization Behaviour Of Polypropylene Containing Nano-Calcium Carbonate And Organic Nucleating Agents