Abstract:Due to their flexible structure and excellent optical characteristics hollow-core photonic crystal fibers (HC-PCFs) are used in many fields, such as active optical devices, communications, and optical fiber sensing. In this paper, to analyze the characteristics of HC-PCFs, we carried out finite element analysis and analyzed the design for the band gap cladding structure of HC-PCFs. First, the characteristics of HC19-1550 and HC-1550-02 in the C-band were simulated. Subsequently, the structural optimization of the seven-cell HC-1550-02 and variations in characteristics of the optimized HC-1550-02 in the wavelength range 1250–1850 nm were investigated. The simulation results revealed that the optimal number of cladding layers is eight, the optimal core radius is 1.8 times the spacing of adjacent air holes, and the optimal-relative thickness of the core quartz-ring is 2.0. In addition, the low confinement loss bandwidth of the optimized structure is 225 nm. Under the transmission bandwidth of the optimized structure, the core optical power is above 98%, the confinement loss is below 9.0 × 10−3 dB/m, the variation range of the effective mode field area does not exceed 10 μm2, and the relative sensitivity is above 0.9570. The designed sensor exhibits an ultra-high relative sensitivity and almost zero confinement loss, making it highly suitable for high-sensitivity gas or liquid sensing.

Analytical Method for Band Structure Calculation of Photonic Crystal Fibers Filled with Liquid Crystal.

A Type of Lyot Fiber Depolarizer Based on Photonic Crystal Fiber

A Novel Eigenvalue Method for Calculating the Band Structure of Lossy and Dispersive Photonic Crystals

Band Structure and Light Propagation in Photonic Crystals

A New Method of Modeling Cladding Band Structure of Air-Guiding Photonic Crystal Fibers

Investigation of Thermal Influence on the Bandgap Properties of Liquid-Crystal Photonic Crystal Fibers

Polarization Dependent Guiding in Liquid Crystal Filled Photonic Crystal Fibers

An efficient and unified method for band structure calculations of 2D anisotropic photonic-crystal fibers

Characteristics Modeling of Photonic Crystal by Using Numerical Techniques

Analysis of finite-size coated electromagnetic bandgap structure by an efficient scattering matrix method

Analytical determination of the stop band tuning of photonic crystals infiltrated with liquid crystals

Band Structure of a Two-Dimensional Photonic Crystal with a Triangular Lattice of Anisotropic Elliptic Cylinders

Existing conditions of full bandgaps and absolute negative refraction in metallic-dielectric photonic crystal

Band Structures of Two-Dimensional Photonic Crystals with Regular Polygon Cylinders Calculated by Linear Operations

Obtaining The Band Structure Of A Complicated Photonic Crystal By Linear Operations

Band structure of photonic crystal fibers with silica rings in triangular lattice

Calculations of Photonic Crystal Fibers by the Galerkin Method with Sine Functions without a Refractive Index Approximation

Visualization of Photonic Band Structures via Far-field Measurements in SiNx Photonic Crystal Slabs

Theoretical Investigations Of Birefringence In Hybrid Photonic Crystal Fibers

Characteristic Analysis and Structural Design of Hollow-Core Photonic Crystal Fibers with Band Gap Cladding Structures

Analytical Theory of Finite-Size Photonic Crystal Slabs Near the Band Edge.