Abstract:The mechanical interaction between welded panel and fixture has a remarkable influence on the distribution of weld induced residual stress and distortion.Unfortunately,the influence of fixture is not generally included in conventional numerical simulations of welding process.In the present study,it is proposed that the numerical models in which the mechanical interaction between welded panel and fixture is considered as contact pair in the finite element analysis(FEA) of welding process.This could make the FEA of welding process more scientific and accurate.The fixture constraint plays an important role in accurate modeling of welding process.In the simulations,various mechanical constraint boundary conditions in welding process were thought about to establish the relationships of the normal and tangential mechanical interactions between welded panel and fixture. In Free model,the fixture restraint was not considered.In Mech model,the displacements of nodes where welded panel contacted with fixture were restricted in x,y,z directions.Hard model and Tabular model were contact models which included the fixture.In the normal direction,once welded panel and fixture were in contact,the transmitted contact pressure could be infinite in Hard model.While data pairs of contact pressure vs over-closure or clearance were specified to define a piecewise-linear relationship in the normal direction in Tabular model.A penalty friction coefficient of 0.3 was applied in tangential direction in both Hard and Tabular models.Fixture and welded panel were separated and the contact relationships were removed after the welding process in both Hard and Tabular models. The simulation results of contact models including fixture were more accurate,compared to models containing only welded panel with rigid restrictions.The distortion mode of welded panels under different fixture constraint conditions corresponded well with experimental results.The differences between the distributions of transverse stresses on top and bottom surfaces of welded panel at the beginning of welding process had a crucial influence on the distortion mode of welded panel.

ANALYSIS AND CONTROL TECHNIQUE OF FIXTURING DEFORMATION MECHANISM OF THIN-WALLED WORKPIECE

Finite Element Simulation for Optimal Clamping Scheme of Thin-Walled Workpiece in Milling Process

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Finite Element Model for Optimal Clamping Scheme of Frame Shape Workpiece Based on Residual Stress Distribution

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

Finite Element Analysis of Displacement Performances of Flexure Hinge Mechanism Affected by Machining Errors

Parametric Finite Element Analysis Of Output Displacement Affected By Machining Errors Of Flexure Hinge Mechanism

Fixture Performance Improvement By An Accelerated Integral Method Of Fixture Layout And Clamping Force Plan

A Rapid Design Method of Anti deformation Fixture Layout for Thin Walled Structures

One Fast Fixture Layout And Clamping Force Optimization Method Based On Finite Elment Method

Elastic Mechanics-Based Fixturing Scheme Optimization of Variable Stiffness Structure Workpieces for Surface Quality Improvement

Prediction of clamping deformation in vacuum fixture–workpiece system for low-rigidity thin-walled precision parts using finite element method

Optimization Method of Floating Fixture Layout for Distortion Control of Low-Stiffness Thin-Walled Beams

Numerical Analysis on the Clamping Reliability of Fixture-Workpiece Facility Considering Partial Slip

Machining fixture and deformation control of aero-engine thin-walled casing

A Deformation Control Method in Thin-Walled Parts Machining Based on Force and Stiffness Matching Via Cutter Orientation Optimization

ESTABLISHMENT AND APPLICATION OF FIXTURE CONSTRAINT MODELS IN FINITE ELEMENT ANALYSIS OF WELDING PROCESS

Failure control on hydroforming process of thin-walled aluminum alloy with complex surface covers

An approach for optimising the fixturing configuration in flexible machining fixtures