Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Development of a Test Bench for Large-Scale Wind Turbine Controllers Based on dSPACE

Development of the Control and Acquisition System for a Natural-Gas Spark-Ignition Engine Test Bench

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Research and Application of HIL Automatic Test Platform for DCT Control System

Design and Modeling of a Test Bench for Dual-Motor Electric Drive Tracked Vehicles Based on a Dynamic Load Emulation Method

Experimental platform for developable DFIG control based on DSP

The Development of the Static and Dynamic Performance Integrated Test System for Electro-hydraulic Servo Valve

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System Based on Bladed

Design of automatic hydraulic test bench based on LabVIEW

Design of Dynamic Simulation of Wind Turbine

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Test Bench Development for Civil Aircraft Integrated Electrical Mechanical Control System

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

The Development of Dynamic Test Bench for EV Hybrid Brake System

Research on hardware-in-the-loop simulation for hybrid powertrain

STUDY ON ELECTROHYDRAULIC PROPOTION AND PITCH-CONTROLLED TECHNOLOGY OF WIND TURBINE

Study on the Control of AC Dynamometer System for Hybrid Electrical Vehicle Test Bench

Test system of a small wind turbine under laboratory conditions

Real-Time testing of novel robust digital pitch controller for digital hydraulic pitch system in wind turbine

Modeling and hardware-in-the-loop implementation of real-time aero-elastic-electrical co-simulation platform for PMSG wind turbine

Wind Turbine Real-time Simulation Based on Discrete Space Vector Modulation Direct Torque Control