Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Study on Influences of Improving the Conversion Degree of Fatty Acid Methyl Ester by Using Chemical and Ultrasonic Methods in the NaOCH_3 Catalyzed System

Preparation of Fatty Acid Methyl Ester Catalyzed by Solid Acid from By- Products of Plam Oil

Esterification of High-Acid Value Oil

Enhancement of hydrodynamic cavitation in the esterification reaction of soybean oil deodorizer distillate

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Ultrasound assisted enzymatic conversion of non edible oil to methyl esters

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Effect of reaction conditions in the catalytic esterification of palm fatty acid distillate to produce fatty acid methyl ester

Intensification and Optimization of FAME Synthesis via Acid-Catalyzed Esterification Using Central Composite Design (CCD)

Improvement in lipase-catalyzed synthesis of fatty acid methyl esters from sunflower oil

Data on the derived mesoporous based catalyst for the synthesized of fatty acid methyl ester (FAME) from ternary oil blend: An optimization approach

Enhancing efficiency of ultrasound-assisted biodiesel production catalyzed by Eversa® Transform 2.0 at low lipase concentration: Enzyme characterization and process optimization

TRANSESTERIFICATION REACTION OF COTTENSEED OIL WITH ULTRASONIC WAVE TECHNOLOGY OPTIMIZED BY THE RESPONSE SURFACE METHOD

Process optimization of esterification for deacidification in waste cooking oil: RSM approach and for biodiesel production assisted with ultrasonic and solvent

Evaluation of yield and quality properties of Elaeagnus mollis oil produced by ultrasound-assisted solvent enzymatic extraction

Comparative analysis of eight esterification methods in the quantitative determination of vegetable oil fatty acid methyl esters (FAME)

Comprehensive Optimisation of Biodiesel Production Conditions via Supercritical Methanolysis of Waste Cooking Oil

Lipase-catalyzed methanolysis of microalgae oil for biodiesel production and PUFAs concentration

A Novel Clean Process for the Combined Production of Fatty Acid Ethyl Esters (faees) and the Ethyl Ester of Polyunsaturated Fatty Acids (pufas) from Microalgae Oils

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Co-solvents transesterification of cotton seed oil into biodiesel: Effects of reaction conditions on quality of fatty acids methyl esters