Abstract:This paper investigated the effect of catalyst on transesterification and transesterification mechanism between poly(lactic acid) (PLA) and polycarbonate (PC) under flow field. Three catalysts (zinc borate, titanium pigment and tetrabutyl titanate) were evaluated. It is found that transesterification reaction can take place without any catalyst, while three catalysts can all promote the transesterification reaction between poly(lactic acid) and polycarbonate to a greater extent. 1H nuclear magnetic resonance spectroscopy, gel permeation chromatography and dynamic mechanical analysis revealed that structures of copolymers are not identical in the blends with and without catalyst. For pure blend, most of copolymers have relatively high molecular weight with low PC content, which implies that transesterification reaction most likely happens only once between a PLA chain and a PC chain during mixing process, and only a small amount of multiple reactions happen. However, for the catalyst systems, catalysts induce much more multiple reactions accompanying with the reducing molecular weight in copolymers and increasing PC content. Moreover, it is found that the catalysts not only affect the chain compositions of the product copolymers, but also influence the amount of polymers involved in the reaction. Tetrabutyl titanate is found to be the most effective catalyst in this study where the amount of reacted polycarbonate is more than 4 times of that in pure blend. It is found that PLA segments in copolymer are easily aligned on the interface due to its relatively high Deborah number, which increases the probability of its contact with more PC chains. Although the flow effect on the alignment of chain segment is similar in blends with and without catalysts, the acceleration of reaction due to catalyst makes it possible for multiple reactions. The match of the reaction time and contact time of chain segment of PC and PLA at interfaces is then of key importance in the interfacial transesterification reaction. The effect of flow field on the interfacial reaction is then not only from the interfacial update, but also from the change of chain conformation near the interface.

TRANSESTERIFICATION BETWEEN POLY(LACTIC ACID) AND POLYCARBONATE UNDER FLOW FIELD AND ITS INFLUENCE ON MORPHOLOGY OF THE BLENDS

Influence of Catalyst on Transesterification Between Poly(lactic Acid) and Polycarbonate under Flow Field

Modeling of Coesterification Process for Biodegradable Poly(Butylene Succinate-co-Butylene Terephthalate) Copolyesters

Reactive Blending of Isosorbide-Based Polycarbonates: Catalytic Selectivity and Transesterification Mechanism

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

Study on ester-amide exchange reaction between PBS and PA6IcoT

Thermodynamics and Kinetics of Transesterification Reactions to Produce Diphenyl Carbonate from Dimethyl Carbonate Catalyzed by Tetrabutyl Titanate and Dibutyltin Oxide

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

Pseudo-homogeneous Kinetic Modeling of Dioctyl Terephthalate (DOTP) Production by Esterification of Terephthalic Acid and 2-Ethylhexanol over Tetrabutyl Titanate Catalyst

Reactive Blending of Bisphenol-a Polycarbonate with Isosorbide-Based Polycarbonates: Effect of Chain Flexibility and Compatibility

Modification of the mechanical behavior in the glass transition region of poly(lactic acid) (PLA) through catalyzed reactive extrusion with poly(carbonate) (PC)

Reaction Mechanism Study on Transesterification in Synthesis of Thermotropic Liquid Crystalline Polymer Catalyzed by Zinc(Ii) Carboxylate: A Combination of Dft and Kinetics Analyses

Miscibility, thermal characterization and crystallization of poly(l-lactide) and poly(tetramethylene adipate-co-terephthalate) blend membranes

Reaction Mechanisms and Kinetics of the Melt Transesterification of Bisphenol‐A and Diphenyl Carbonate

Preparation of CO2‐based poly(carbonate‐co‐lactide) with different porphyrin aluminum (III) catalysts

Effect of polycarbonate (PC) content on the mechanical properties, morphology and transesterification mechanism of PBT/PC immiscible blends

Effect of transesterification on high-pressure crystallization behaviour of PET/PC blend system

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion

Exploiting controlled transesterification as a "top down" approach to tailor poly( ε -caprolactone)-poly(lactic acid) copolymer structures with bis-Zn catalysts

Effect of Different Compatibilizers on the Properties of Poly (Lactic Acid)/Poly (Butylene Adipate-Co-Terephthalate) Blends Prepared under Intense Shear Flow Field

Effects of Trans-Esterification Stabilizers on Mechanical Properties and Structure of Poly(butylene Terephthalate)/polycarbonate Blends