Abstract:The ultrasonic surface rolling process (USRP) is a new technique employing a high strain rate and severe plastic deformation (SPD), and treated materials show high homogeneity, a large depth of strengthening and excellent surface integrity. In this work, USRP was used to treat 17-4 martensite precipitation-hardening (PH) stainless steels with a body-centered tetragonal (BCT) structure, and the deformation nanocrystallization mechanism was systematically investigated using microscopy and X-ray diffraction (XRD) analysis. The results indicated that a gradient nanocrystalline structure comprising thermal-mechanical coupled layer, elongated nanograin layer (long axis parallel to the treated surface), elongated ultrafine grain layer, refined grain layer and low-strain matrix layer was fabricated in 17-4PH stainless steels, reaching a thickness of 650 mu m. The grain size presented a regular large-small-large variation, while the dislocation density showed a high-low-high variation with increasing depth. During the nanocrystallization process of 17-4PH stainless steel subjected to USRP, elongated ultrafine grains were formed first, and then grains were refined by dislocation tangles, dislocation bands, and dislocation walls through dislocation glide. In the near surface (approximately 10 mu m below the processed surface), deformation twins presented in the nano-lath microstructure had a positive effect on the formation of nanocrystallites via an interaction between twinning and dislocations. Moreover, the disperse epsilon-Cu precipitated phase had a positive effect on the evolution of the nanocrystalline microstructure. The additivity of strengthening by dislocation density, grains and precipitates was prominently enhanced, and high compressive residual stress was developed.

Nanocrystallization Technology and Corrosion Resistance of Stainless Steel

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Corrosion behaviour of nanocrystallines 304 stainless steel in simulated secondary side environment

Influence of Surface Nanocrystallization on Wear Resistance of Metallic Materials

Errosion-Corrosion Critical Performance of Surface Nanocrystalline 20 Carbon Steel in Condensate Water

Effect of nanocrystallization on the corrosion behavior of low carbon steel

Microstructure Characteristic and Electrochemical Corrosion Behavior of Surface Nano-crystallization Modified Carbon Steel

Experimental investigation on nanoprocessing of stainless steel surface

Enhance corrosion resistance of 304 stainless steel using nanosecond pulsed laser surface processing

Assessing the tribo-corrosion resistance of surface nanostructured stainless-steel

Recent Research on Corrosion Behavior of Nanocrystalline Materials

Anti-corrosion and corrosive wear properties of AISI 316L stainless steel with surface nanocrystallization by surface mechanical rolling treatment

Surface Nanocrystallization of 17-4 Precipitation-Hardening Stainless Steel Subjected to Ultrasonic Surface Rolling Process

Effects of Surface Nano-crystallization on Mechanical Properties of 304 Stainless Steel/CrN Film

Nanosecond Laser Fabrication Of Superhydrophobic Surface On 316l Stainless Steel And Corrosion Protection Application

Surface nanocrystallization of 1Cr18Ni9Ti stainless steel induced by shear deformation

Effect of surface nanocrystallization induced by mechanical grinding treatment on stress corrosion cracking behavior of 316 L austenitic stainless steel in boiling MgCl 2 solution

The Effects of Grain Refinement and Deformation on Corrosion Resistance of Passive Film Formed on the Surface of 304 Stainless Steels

Preparation and cavitation erosion resistance of nanocrystalline surface layer on 304 stainless steels

Study on Hardness and Elastic Modulus of Surface Nanostructured 304 Stainless Steel Using Two Mechanical Methods