Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

SOA‐based Polarity‐preserving All‐optical Wavelength Conversion at 80gbit/s: Wide Conversion Range, Well Dynamic Characteristics and Polarization Insensitive

All-optical NRZ Wavelength Conversion Based on a Single Hybrid III-V/Si SOA and Optical Filtering.

All-Optical Wavelength Converter For Pol-Mux Qpsk Signals Based On A Single Silicon Waveguide

Performance Optimization of the Wavelength Converter Based on Cross-Polarization-Modulation in SOA

All optical wavelength conversion for 2.5Gb/s return-to-zero optical pulse based on cross-gain modulation in soa

A Proposal for Broadband Polarization-Insensitive Wavelength Conversion Using a SOI Waveguide

Low-Polarization, Broad-Spectrum Semiconductor Optical Amplifiers

Wavelength Conversion Using SOAs: Simulations and Experiment

Wavelength Converter for Polarization-Multiplexed 100-G Transmission with Multilevel Modulation Using a Bismuth Oxide-Based Nonlinear Fiber

Integrated Wavelength Conversion for Adaptively Modulated WDM-OFDM Signals in a Silicon Waveguide

All-Optical Wavelength Conversion Based on Tunable V-Cavity Laser

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

All Optical Wavelength Conversion at 2.5 Gbit/s, NRZ optical pulse based on Cross-gain Modulation in SOA

Noninverted wavelength conversion with signal improvement and chirp compression utilizing birefringence in SOAs

Improving Transmission Performance Using a Waveguide Filter in All-Optical Wavelength Converters

All-optical Wavelength Conversion for Polarization Shift Keying Signal Based on Four-Wave Mixing in a Semiconductor Optical Amplifier

All-Optical Wavelength Conversion Based On A Modified Nonlinear Polarization Switch

Numerical Simulation of All-Optical Wavelength Conversion of DPSK Signal Based on SOA in a Mach-Zehnder Configuration

Dynamic Analysis of All-Optical Wavelength Conversion of Differential Phase-Shift Keyed Signals Based on Semiconductor Optical Amplifier Mach–Zehnder Interferometer

Polarization insensitive wavelength conversion based on dual-pump four-wave mixing for polarization multiplexing signal in SOA

All-optical Tunable Wavelength Conversion Based on Cross-Polarisation Modulation in Nonlinear Photonics Crystal Fibre