Abstract:As optical networks advance toward a dynamic multiwavelength all-optical structure, all optical wavelength conversion technologies become vital in the efficient utility of available fiber bandwidth. Experimental demonstrations of optical wavelength conversion usually involves a nonlinear element to transfer the information from the signal wavelength to that of a local laser source. In the case of Non-return-to-zero (NRZ) signals, the local laser source is usually a CW narrow linewidth semiconductor laser. For Return to Zero (RZ) signals, the local laser sources commonly employ a modelocked fiber laser or a modelocked semiconductor laser or a gain switched DFB to generate low jitter optical clock. Various materials and devices can be used as the nonlinear element for wavelength conversion, with the two most common being the optical fiber and semiconductor optical amplifier, though Lithium Niobate has also attracted attention in recent years as a switching element. The advantage of using optical fiber for wavelength conversion is that it is relatively cheap and has low levels of noise. However, the switching energy required to generate the nonlinearity in optical fiber is high compared to that of the SOA [1]. Wavelength conversion using SOA typically uses either four-wave mixing or crosses gain/phase modulation, with the latter method often used in conjunction with an interferometric topology [2]. The advantages of cross phase modulation of SOA in interferometers are the relatively low switching energy required, the fast switching speed, and the ability to integrate the whole structure on a single substrate.

Noninverted wavelength conversion with signal improvement and chirp compression utilizing birefringence in SOAs

Birefringence In Semiconductor Optical Amplifiers And Its Application To All Optical Noninverted Wavelength Conversion

All-optical NRZ Wavelength Conversion Based on a Single Hybrid III-V/Si SOA and Optical Filtering.

All optical wavelength conversion for 2.5Gb/s return-to-zero optical pulse based on cross-gain modulation in soa

All Optical Wavelength Conversion at 2.5 Gbit/s, NRZ optical pulse based on Cross-gain Modulation in SOA

All-optical Wavelength Conversion and Five-Channel Multicasting for 20 Gbit/s QPSK Signals in a Silicon Waveguide.

All-Optical Wavelength Conversion Using Optical Injection Induced Wavelength Switching In V-Cavity Laser

All-Optical Wavelength Conversion Using Widely Tunable V-Cavity Semiconductor Laser

Performance Optimization of the Wavelength Converter Based on Cross-Polarization-Modulation in SOA

Integrated Wavelength Conversion for Adaptively Modulated WDM-OFDM Signals in a Silicon Waveguide

Improving Transmission Performance Using a Waveguide Filter in All-Optical Wavelength Converters

All-Optical Wavelength Conversion Based on Tunable V-Cavity Laser

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

Optical wavelength conversion of high bandwidth phase-encoded signals in a high FOM 50cm CMOS compatible waveguide

Wavelength Conversion Using SOAs: Simulations and Experiment

All-Optical Wavelength Converter For Pol-Mux Qpsk Signals Based On A Single Silicon Waveguide

Optical Signal Processing Based on Semiconductor Optical Amplifier and Tunable Delay Interferometer

40 Gbit/s Wavelength Conversion in Cascade of SOA and NOLM and Demonstration of Extinction Ratio Improvement

Improving performance using waveguide filter and optimal probe and signal powers for all-optical wavelength conversion

Penalty-free bidirectional transmission of 4/spl times/10 Gbit/s signals over 88-km of true-wave fiber using an in-line semiconductor optical amplifier

A Simple All-Optical Wavelength Converter Based on Cascaded Highly Nonlinear Fibers with High Conversion-Efficiency