Abstract:A series of thermosetting siloxane-containing polyimide resins were synthesized by incorporating of bis(p-aminophenoxy)dimethylsilane or bis(p-aminophenoxy)tetramethyldisiloxane with various concentrations into formulated oligoimides. These thermosetting polyimide resins exhibited good combination of processability and thermal resistance. It was found that siloxane-containing oligoimides provided significant advantages over unmodified oligoimides, relative to melt fluidity and processing window, due to the flexibility of D[(CH3)2SiO2/2] siloxy units. The siloxane-containing polyimide resins cured at 380 °C revealed relatively higher glass transition temperatures (Tg) than that of unmodified polyimides, despite the incorporation of flexible siloxane segment in oligoimides. Dynamic mechanical analysis and microstructure investigation suggested that some D[(CH3)2SiO2/2] siloxy units in the surface layer of polyimide transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units in the curing procedure besides crosslinking of phenylethynyl groups, due to oxidation crosslinking of siloxane. That led to inorganic silica-like structures formed in situ, and inter-connected by organic polyimide segments. This organic/inorganic hybrid characteristics endowed polyimide resins with enhanced thermal property. After post-curing at 450 °C, D[(CH3)2SiO2/2] siloxy units completely transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units, and the polyimide reins gave the Tg even exceeding 550 °C. Meanwhile, the corresponding T700 carbon fiber reinforced composite presented excellent mechanical property and durability at the temperature as high as 500 °C.

Synthesis and Characterization of Poly(imide‐urethane) Based on Novel Chain‐extender Containing Both Imide and Sulphone Functions

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Blends of thermoplastic polyurethane and polyether–polyimide: preparation and properties

Synthesis and Characterization of Novel Highly Branched Block Copoly(urethane‐imide)s Based on Pentaerythritol, Different Diisocyanate and Aromatic Dianhydride

Phenylethynyl-terminated Oligoimides Based on Bis(p-Aminophenoxy)dimethyl Silane: Effect of Siloxane Structure on Processability and Thermal Stability

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

Solvent Resistant Self-Crosslinked Poly(ether Imide)

Synthesis and Properties of Some New Polyimides Containing Bithiazole Rings

Polyether–polyimide Thermoplastic Elastomers. I. Synthesis and Properties

Effect of Charge Transfer and Chain Stacking on the Optical and Thermal Properties of Polyimides Derived from Sulfone and Amide-Containing Dianhydride

Synthesis and Characterization of Novel Fluorinated Polyimides Derived from 4-Phenyl-2,6-bis[4-(4′-amino-2′-trifluoromethyl-phenoxy)phenyl]pyridine and Dianhydrides

Enhancing mechanical and thermal properties of blends with novel phenylethynyl-terminated siloxane-containing ortho-hydroxy polyimide

Synthesis And Characterization Of Radiopaque Poly(Ether Urethane) With Iodine-Containing Diol As Chain Extender

High thermally stable thermosetting polyimides derived from a carborane-containing tetramine

Structure and Properties of Thermoplastic Polyimide Based on 4', 4'-(Oxybis (methylene)) Bis ([1.1'- Bipheny]3-Amine) Diamine

Melt fluidity and thermal property of thermosetting siloxane-containing polyimide resins and their organic/inorganic hybrid characteristics

Soluble and Cross-Linkable Polyimides from a Vanillin-Derived Diamine: Preparation, Post-Polymerization and Properties

Synthesis of Polyimide-Siloxane Copolymers and Their Properties

SYNTHESIS AND CHARACTERIZATION OF A POLYIMIDE CONTAINING PHENOLPHTHALEIN GROUPS

Preparation, Characterization And Selective Solubility Of Diels-Alder Addition Polyimides