Abstract:In this article, we propose a voltage-controlled oscillator (VCO) with a single three-coil transformer, featuring a common-mode (CM) resonance expansion and intrinsic differential 2nd harmonic output. In addition to a conventional transformer-based class-F resonator, an internal third coil is added to manipulate the CM response. On one hand, it expands the CM resonance bandwidth, eliminating the need for manual harmonic tuning to align the 2nd harmonic resonance. On the other hand, it creates a simultaneous wideband differential response at the 2nd harmonic frequency, therefore, the power consumption of the extra frequency doubler can be saved. Using the proposed stacked 8-shape inductor topology, the third coil can be placed inside the class-F transformer without consuming an extra chip area. Fabricated in a 65-nm CMOS process, the measured tuning range of the proposed VCO is 21.1%, from 12.3 to 15.2 GHz. The proposed VCO achieves a peak phase noise (PN) performance of -118.0 and -111.9 dBc/Hz at 1 MHz offset for fundamental frequency and 2nd harmonic, respectively, the corresponding peak figure-of-merit (FoM) of which is 190.4 and 190.1 dBc/Hz, respectively. The VCO consumes a power of 8.4-9.6 mW, while occupying a small area of 0.06 mm(2) thanks to the stacked 8-shape inductor topology.

Design and Analysis of Wide Frequency-Tuning-Range CMOS 60 GHz VCO by Switching Inductor Loaded Transformer

Differential VCO design with a wide frequency tuning range

A Ku-Band 20.4% Tuning Range VCO with a Tunable Harmonic-Resonant Transformer in 55 Nm CMOS

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

A Two-stage VCO With Extra Wide Tuning Range

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A 6.5mW, wide band dual-path LC VCO design with mode switching technique in 130nm CMOS

A 12.5-to-15.4ghz, -118.9Dbc/hz PN at 1mhz Offset, and 191.0dbc/hz FoM VCO with Common-Mode Resonance Expansion and Simultaneous Differential 2Nd-Harmonic Output Using a Single Three-Coil Transformer in 65nm CMOS.

A 20–25.5 GHz VCO Using a New Variable Inductor for K Band Application

Transformer-based Varactor-Less 96ghz–110ghz VCO and 89ghz–101ghz QVCO in 65nm CMOS

A Design of DCO with 73.1% Frequency Tuning Range Based on Switched Transformer

A 25MHz–6.44GHz LC-VCO using a 5-port inductor for multi-band frequency generation

Design of a 24GHz wide tuning-range VCO with optimized switches in resonator

A 31–46 GHz Dual-Core Class-C VCO Using Switchable Transformers in 28-Nm CMOS

An 110 GHz CMOS Colpitts VCO based on switched coupled-inductor

A 28-nm Dual-Mode Explicit Class-F23 VCO With Low-Loss CM Return Path Achieving 70–400-kHz 1/f3 PN Corner Over 4.9–7.3-GHz TR

A 5 to 11.1 GHz Quad-Core Quad-Mode Octave Tuning-Range CMOS LC VCO

A Low-Phase-Noise VCO with Common-Mode Resonance Expansion and Intrinsic Differential 2Nd-Harmonic Output Based on a Single Three-Coil Transformer

A 0.065 mm 2 Inductive Coupling Based Dual Core mm-Wave VCO With 183 dBc/Hz FoMT

Design of a Low-Phase-Noise 70-/105-GHz Dual-Band VCO With Common Mode Resonance Expansion

The Design of a 2.82～4.04 GHz CMOS Differential Tuned LC VCO