Abstract:A two-axis Lloyd's mirrors interferometer based optical fabrication system was theoretically investigated and constructed for patterning high-uniformity nanoscale crossed grating structures over a large area with a high throughput. The current interferometer was configured with two reflected mirrors and a grating holder, which are placed edge by edge and orthogonal with each other. In such a manner, the two beams reflected from the two mirrors interfere with the incident beam, respectively, forming a crossed grating patterns with only one exposure. Differing from the conventional solution for elimination of unexpected interference between the two reflected beams, a systematical analysis, that is based on the proposed index indicating the non-orthogonality between the two beams at different incident angles, was conducted by using a spatial full polarization tracing method. Without polarization modulation to eliminate the additional interference, an optimal exposure condition with small non-orthogonality between reflected beams was found at a certain incident angle range, while the two required interferences to construct cross grating still remain high. A pattern period of ∼1 µm-level crossed grating structure could be obtained through balancing the structure area and the non-orthogonality. Finally, the exposure setup with orthogonal two-axis Lloyd's mirrors interferometer is established, and the crossed grating structure with the periods of 1076 nm along X-direction and 1091 nm along Y-direction was successfully fabricated on a silicon substrate via microfabrication technology over a large area of 400 mm2. The uniformity of crossed grating array over the whole area was evaluated by an atomic force microscope, and the standard deviations of structure periods along X- and Y-directions smaller than 0.3% are achieved. It is demonstrated that the orthogonal two-axis Lloyd's mirrors interferometer based on single-beam single-exposure scheme with non-orthogonality systematic analysis is an effective approach to fabricate crossed grating patterns of 1 µm-level period with high uniformity over a large area.

Development and application research of laser interference lithography process

High Throughput Laser Nano Direct Writing Technique

Analysis of a Lloyd's Mirror Interferometer for Fabrication of Gratings

Laser Interference Lithography-A Method for the Fabrication of Controlled Periodic Structures

Fabrication of two-dimensional micro patterns for adaptive optics by using laser interference lithography

Laser Interference Fabrication of Large-Area Functional Periodic Structure Surface

Parallel Laser Micro/Nano‐Processing for Functional Device Fabrication

Recent Advances of Laser Interference Lithography

2510 Laser Interference Lithography with a Modified Two-Axis Lloyd's Mirror Interferometer for Fabrication of Two-Dimensional Micro Patterns

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Periodic Microstructures Fabricated by Laser Interference with Subsequent Etching

Self‐Aligned Laser‐Induced Periodic Surface Structures for Large‐Area Controllable Nanopatterning

Fast Fabrication of Large-Area Two-Dimensional Micro/Nanostructure by Femtosecond Laser

Superlens-enhanced Laser Interference Lithography

Design and Simulation of Symmetric Nanostructures Using Two-Beam Modulated Interference Lithography Technique

Large-Area Plasmonic Structures Fabricated by Laser Nanopatterning and Their Applications

Patterning Nanoscale Crossed Grating with High Uniformity by Using Two-Axis Lloyd's Mirrors Based Interference Lithography.

Research progress of laser lithography

Surface Nano-fabrication by Laser Precision Engineering

Omnidirectional investigation of two-dimensional periodic nanostructure arrays by a two-axis Lloyd’s mirror interferometer

Low-cost lithography for fabrication of one-dimensional diffraction gratings by using laser diodes