Abstract:Fe3S4 @ S @ 0.9Na3SbS4⋅0.1NaI composite cathode is prepared through one‐step wet‐mechanochemical milling procedure. During milling process, ionic conduction pathway is self‐formed in the composite due to the formation of 0.9Na3SbS4⋅0.1NaI electrolyte without further annealing treatment. Meanwhile, the introduction of Fe3S4 can increase the electronic conductivity of the composite cathode by one order of magnitude and nearly double enhance the ionic conductivities. Besides, the aggregation of sulfur is effectively suppressed in the obtained Fe3S4 @ S @ 0.9Na3SbS4⋅0.1NaI composite, which will enhance the contact between sulfur and 0.9Na3SbS4⋅0.1NaI electrolyte, leading to a decreased interfacial resistance and improving the electrochemical kinetics of sulfur. Therefore, the resultant all‐solid‐state sodium–sulfur battery employing Fe3S4 @ S @ 0.9Na3SbS4⋅0.1NaI composite cathode shows discharge capacity of 808.7 mAh g−1 based on Fe3S4@S and a normalized discharge capacity of 1040.5 mAh g−1 for element S at 100 mA g−1 for 30 cycles at room temperature. Moreover, the battery also exhibits excellent cycling stability with a reversible capacity of 410 mAh g−1 at 500 mA g−1 for 50 cycles, and superior rate capability with capacities of 952.4, 796.7, 513.7, and 445.6 mAh g−1 at 50, 100, 200, and 500 mA g−1, respectively. This facile strategy for sulfur‐based composite cathode is attractive for achieving room‐temperature sodium–sulfur batteries with superior electrochemical performance.

Charge/discharge characteristics of sulfur composite electrode at different temperature and current density in rechargeable lithium batteries

Electrochemical Characteristics of Sulfur Composite Cathode Materials in Rechargeable Lithium Batteries

The Electrochemical Characteristics of Sulfur Composite Cathode

Room temperature Na/S batteries with sulfur composite cathode materials

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Core-Shell Sulfur@Polypyrrole Composites As High-Capacity Materials for Aqueous Rechargeable Batteries

Sulfur Composite Cathode Materials for Rechargeable Lithium Batteries

Research on S-containing Composite Cathode Material for Lithium Rechargeable Battery

New Insight into the Working Mechanism of Lithium–Sulfur Batteries under a Wide Temperature Range

Polymer lithium cells with sulfur composites as cathode materials

Expansion and shrinkage of the sulfur composite electrode in rechargeable lithium batteries

Self‐Formed Electronic/Ionic Conductive Fe 3 S 4 @ S @ 0.9Na 3 SbS 4 ⋅0.1NaI Composite for High‐Performance Room‐Temperature All‐Solid‐State Sodium–Sulfur Battery

Concrete-like High Sulfur Content Cathodes with Enhanced Electrochemical Performance for Lithium-Sulfur Batteries

Kinetic investigation of sulfurized polyacrylonitrile cathode material by electrochemical impedance spectroscopy

Charge/discharge Characteristics of Sulfurized Polyacrylonitrile Composite with Different Sulfur Content in Carbonate Based Electrolyte for Lithium Batteries

Sulfur carbon composite cathodes for rechargeable lithium battery

A composite material of uniformly dispersed sulfur on reduced graphene oxide: Aqueous one-pot synthesis, characterization and excellent performance as the cathode in rechargeable lithium-sulfur batteries

Amorphous S-rich S1−xSex/C (x ≤ 0.1) composites promise better lithium–sulfur batteries in a carbonate-based electrolyte

Sulfur–carbon Nano-Composite As Cathode for Rechargeable Lithium Battery Based on Gel Electrolyte

Preparation and Performance of a Sulfur/graphene Composite for Rechargeable Lithium-Sulfur Battery

A Se/C composite as cathode material for rechargeable lithium batteries with good electrochemical performance