Abstract:Biological desulfurization under haloalkaline conditions has been applied worldwide to remove hydrogen sulfide (H 2 S) from sour gas steams. The process relies on sulfide-oxidizing bacteria (SOB) to oxidize H 2 S to elemental sulfur (S 8 ), which can then be recovered and reused. Recently, a dual-reactor biological desulfurization system was implemented where an anaerobic (sulfidic) bioreactor was incorporated as an addition to a micro-oxic bioreactor, allowing for higher S 8 selectivity by limiting by-product formation. The highly sulfidic bioreactor environment enabled the SOB to remove (poly)sulfides (S X 2− ) in the absence of oxygen, with S X 2- speculated as a main substrate in the removal pathway, thus making it vital to understand its role in the process. The SOB are influenced by the oxidation reduction potential (ORP) set-point of the micro-oxic bioreactor as it is used to control the product of oxidation (S 8 vs. SO 4 2− ), while the uptake of S X 2− by SOB has been qualitatively linked to pH. Therefore, to quantify these effects, this work determined the concentration and speciation of S X 2- in the biological desulfurization process under various pH values and ORP set-points. The total S X 2- concentrations in the sulfidic zone increased at elevated pH (8.9) compared to low pH (< 8.0), with on average 3.3 ± 1.0 mM-S more S x 2− . Chain lengths varied, with S 7 2− only doubling in concentration while S 5 2− increased 9 fold, which is in contrast with observations from abiotic systems. Changes to the ORP set-point of the micro-oxic reactor did not produce substantial changes in S X 2- concentration in the sulfidic zone. This illustrates that the reduction degree of the SOB in the micro-oxic bioreactor does not enhance their ability to interact with S x 2− in the sulfidic bioreactor. This increased understanding of how both pH and ORP affect changes in S X 2− concentration and chain length can lead to improved efficiency and design of the dual-reactor biological desulfurization process.

Effect of pH on anoxic sulfide oxidizing reactor performance.

EFFECT OF NITRITE TO SULFIDE RATIOS ON THE PERFORMANCE OF ANOXIC SULFIDE OXIDIZING REACTOR

Effects of Loading Rate and Hydraulic Residence Time on Anoxic Sulfide Biooxidation

Effect of Ph Shock on Performance of Reactor for Simultaneous Anaerobic Sulfide and Nitrate Removal

Influence of Various Nitrogenous Electron Acceptors on the Anaerobic Sulfide Oxidation.

Performance of Sulfate-Dependent Anaerobic Ammonium Oxidation

The Effect of Ph on Anaerobic Fermentation of Primary Sludge at Room Temperature.

Long-term Effects of Increasing Acidity on Low-Ph Sulfate-Reducing Bioprocess and Bacterial Community

Influence of Transient Ph and Substrate Shocks on Simultaneous Anaerobic Sulfide and Nitrate Removal

Orthogonal Test Design Based Analysis of Factors Controlling Simultaneous Anaerobic Sulfide and Nitrate Removal Process

Modeling the Ph Effects on Nitrogen Removal in the Anammox-Enriched Granular Sludge.

Effect of Low Ph on the Performance of High-loaded ANAMMOX Reactor

Effects of ethanol/SO4 2- ratio and pH on mesophilic sulfate reduction in UASB reactors

The Sulfide Oxidation in an Electrolytic Sulfide Oxidizing Bioreactor Using Graphite Anode

Effects of Ethanol/So42- Ratio and Ph on Mesophilic Sulfate Reduction in Uasb Reactors

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Influence of oxidation reduction potential and pH on polysulfide concentrations and chain lengths in the biological desulfurization process under haloalkaline conditions

[Impact of Ph on the Generation of COD, Phosphorous and Ammonia-Nitrogen During the Anaerobic Fermentation of Excess Activated Sludge].

Effect of pH on sulfate removal from wastewater using a bioelectrochemical system

Effect of Ph, ALK and ORP on Removal Rate of Sulfate in Acidogenic Sulfate- Reducing Bioreactor

Effect of sulfide on the nitrogen removal performance and microbial community of low-substrate Anammox process