Abstract:Concrete-to-concrete interfaces present both in new and existing construction, are commonly regarded as the weak link. Durability research of interfaces is a vital prerequisite for structural rehabilitation and strengthening applications under marine and coastal environments. Hence, to clarify the chloride ion transport behavior be-tween the new-old concrete composite system and its constituents, microstructural characteristics of the in-terfaces with various preparation methods were determined via field emission scanning electron microscopy. Then, the time-dependent diffusion chloride ion penetration together with its steady-state concentration distri-bution evaluated by using AgNO3 chromogenic, electron microprobe, and energy spectrum methods, as well as the numerical simulation based on the real interface roughness from the 3D laser scanning optical system. Results show that microcracks and a large amount of CaCO3 precipitations were formed in the concrete-to-concrete interface, where its porosity was higher compared to that of the matrix and interface transition zone around coarse aggregate; Therefore, the interface regions have higher tortuosity of water transport channel and strengthen the solution absorption rate, resulting in the internal chloride ions not only diffuse deeper perpen-dicular to the exposed surface but also ingress into the concrete on both sides as the concentration gradient simultaneously, leading to a "diffusion peak" formation. Furthermore, the effects of groove characteristics (such as orientations, clearance, width, and depth) on chloride transport were modeling evaluated in this study, in which the interfacial relationship could be optimized setting the reasonable groove and achieving the goal of durability equivalent to the cast-in-place structure.

Combined effect of abrasion of sediment-laden flow and chloride ions penetration on the durability of concrete

Chloride Penetration in Surface-Treated Concrete in Natural and Accelerated Environments

Comparison of Chloride Penetration into Surface-Treated Concrete in Artificial and Natural Environments

EXPERIMENTAL ENHANCEMENT STUDY ON DURABILITY OF CONCRETE IN WHARF PROJECT

Feasibility and Application of Concrete Containing Chloride-rich Offshore Sand

Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete in Marine Tidal Zone

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Effect of Chlorine Salt on Durability of Mineral Admixture Concrete under Different Conditions

Co-effects of initial and exposure environments on chloride penetration

Concrete Admixed with Modified Auxiliary Cementing Materials for Real Sea Service

Accelerating Tests For The Performance Deterioration Of Concrete Exposed To Chloride Media

Chloride Penetration into Concrete Damaged by Uniaxial Tensile Fatigue Loading

Degradation Mechanisms of Chloride Contaminated Cast-in-Situ Concrete Partially Exposed to Magnesium-Sulfate Combined Environment

Research on improving the durability performance of damaged concrete with mineral admixtures

Study on Concrete Deterioration and Chloride Ion Diffusion Mechanism by Different Aqueous NaCl-MgSO4 Concentrations

Influence of the coupled effect of stray current and sulfate upon chloride diffusing into concrete of underground structures

Mechanism Analysis of Chloride Ion Penetration Resistance of Marine Concrete and its Durability Life Prediction