Abstract:Cable net structures are generally highly tensioned to resist the deformation induced by external loads, while the peripheral structural members are heavily burdened to balance the pretension. A numerical strategy is proposed to relieve the pretension without changing the structural geometry and deformation by exchanging the stiffness components, i.e., the structural elastic stiffness and geometrical stiffness. Based on the eigen-decomposition of the tangent stiffness matrix, the stiffness resistance to the deformation generated by a dominant load is quantified for any direction of eigenvector. The key structural stiffness is therefore defined and characterized by those eigenvalues and their corresponding eigenvectors with significant stiffness resistances. The contributions to the key structural stiffness are evaluated for the structural elastic stiffness and geometrical stiffness, respectively, and whether the decrease in key structural stiffness due to the pretension reduction can be compensated with the elastic stiffness by changing the cross-sectional areas of cables is analyzed. Then, the variations in isolated or closely spaced eigenvalues and their corresponding eigenvectors are estimated based on the first-order pertur-bation analysis of the tangent stiffness matrix. The underdetermined system of linear equations between the adjustments of the cross-sectional areas of cables and the expected variation in the key structural stiffness is established, and its least squares solution is employed to minimize the rehabilitation cost of the key structural stiffness. The proposed numerical strategy is applied to rehabilitate the key structural stiffness of an illustrative saddle-shaped cable net structure, whose pretension is proportionally decreased to different levels, by adjusting the cross-sectional areas of cables, and its accuracy and validity are verified. The applicability of the numerical strategy is also discussed in terms of the contribution coefficient of elastic stiffness to the key structural stiffness and the magnitude of pretension reduction.

THE METHOD OF SOLVING UNSTABLE EQUILIBRIUM STATES OF CABLE-NET STRUCTURES

Elastified Procedure for the Form-found Equilibrium State and Zero-stress State of Cable-net Structure

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

THEORETICAL ANALYSIS OF CONSTRUCTION PROCEDURES OF CABLE-DOMES

Tension Control and Multi-Objective Optimization of Tensile Cable Net Structure Construction

METHOD OF CABLE FORCE CONTROL DURING ACCUMULATIVE SLIDING CONSTRUCTION FOR PRETENSIONED RETICULATED STRUCTURES

Numerical Simulation Algorithm for the Forming Process of Tensile Cable-Strut Structure

STATIC EQUILIBRIUM FORM-FINDING ANALYSIS OF CABLE-STRUT SYSTEM BASED ON NONLINEAR DYNAMIC FINITE ELEMENT METHOD

Computational methods for the zero-stress state and the pre-stress state of tensile cable-net structures

Computational Method for Prestress Developing of Tensile Cable-Net Structures

Analysis of Formation of Spoke-Shaped Cable-Strut System with Synergistic Effect of Column-Beam Structures

Form finding of slack cable-bar assembly by dynamic relaxation method

Optimization Design of Initial Equilibrium State of Cable-Net Structures

Initial Pre-Stress Finding and Structural Behaviors Analysis of Cable Net Based on Linear Adjustment Theory

ANALYSIS ON THE INITIAL EQUILIBRIUM CONFIGURATION OF CABLE STRUCTURES

A Practical Compensation Algorithm of Stress Relaxation Due to Single Tension

NUMERICAL APPROACH FOR SIMULATING THE TENSIONING PROCESS OF COMPLEX PRESTRESSED CABLE-NET STRUCTURES

Form-finding Method Research and Formation Procedure Experiment of Cable-Net

A Numerical Strategy for Relieving Pretension of Cable Net Structures by Exchanging Stiffness Components

Nonlinear Static Analysis and Cable-length Solution of a Cabin-cable System

Form Finding of Slack Cable Assembly under Geometrically Unstable Equilibrium State