Abstract:The submerged entry nozzle (SEN) plays an important role in the continuous casting production process. It is a cast refractory pipe fitting installed in the lower part of the tundish and inserted below the molten steel level of the mold. It not only affects the speed of molten steel flow, but is also prone to nodules and affects production. In the present work, the flow behavior of molten steel in a traditional nozzle and that in a new type of nozzle whose inner wall was distributed with arrays of hemispherical crowns were studied by means of both physical simulation (using a water model) and numerical simulation (using ANSYS CFX) based on the prototype of a production continuous casting slab mold. Both experimental and numerical simulation results show that, compared with the traditional nozzle, the impact depth generated by the new-type nozzle in the mold is reduced by 21.06–26.03 cm, the impact angle is reduced by 14–17 degrees, and swirl flow was generated inside the new-type nozzle, which not only improves the flow characteristics inside the submerged entry nozzle and changes the dead zone size in the submerged entry nozzle, but also improves the velocity distribution at the outlet of the nozzle and minimizes the possibility of nodulation. In addition, in contrast to the traditional nozzle that generates flat body-shaped jets of molten steel flow, the new-type nozzle produces baseball glove-shaped jets that penetrate shallower into the molten steel bath in the mold, which significantly reduces the outlet velocity and is conducive to the floating of inclusions.

Physical and Numerical Simulation Research on Flow Field and Temperature Field in Mold for Slab Caster

Numerical Simulation on Flow Field, Temperature Field and Inclusion Removal in the Mold for Slab Caster

Numerical simulation and optimization of flow and temperature fields for wide slab cast mold

Numerical Simulation of Asymmetry Flow Phenomena in a Mold for Slab Continuous Casting

NUMERICAL SIMULATION ON FLUID FLOW IN MOULD FOR SLAB CONTINUOUS CASTING

Numerical Simulation of Flow Field and Submerged Entry Nozzle in Mold of Wide and Thick Slab Continuous Casting

Simulation of Molten-steel Flow Fields in a Continuous Slab Casting Mold

Coupling Numerical Simulation of Flow Field, Temperature Field and Stress Field in a Wide-Thick Slab Continuous Casting Mold

NUMERICAL STUDY OF MOLTEN STEEL BEHAVIORS IN 170x1400mm(2) SLAB CONTINUOUS CASTING MOLD

Modeling and Simulation of the Fluid Flow in Continuous Slab Casting Mould

Simulation of Shell Thickness Distribution and Flow Field in Slab Continuous Casting Mold

Numerical Simulation on Free Surface in the Mold of Slab Continuous Caster at Low Casting Speed with MFCD

Influences of Casting Speed and Sen Depth on Fluid Flow in the Funnel Type Mold of a Thin Slab Caster

Effect of Bottom Structure of Submerged Entry Nozzle on Flow Field and Temperature Field in Continuous Casting Mold

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Effect of Casting Parameters on the Flow Pattern in a Steel Continuous Casting Slab Mold: Numerical Simulation and Industrial Trials

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold

Simulation of the fluid flow in continuous casting copper slab mold for different SEN design

Flow and temperature fields in slab continuous casting molds

Physical and Numerical Simulation Study on Structure Optimization of the Inner Wall of Submerged Entry Nozzle for Continuous Casting of Molten Steel

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation