Abstract:A current-mode front-end circuit with low voltage and low power for analog hearing aids is presented. The circuit consists of a current-mode AGC (automatic gain control) and a current-mode adaptive filter. Compared with its conventional voltage-mode counterparts, the proposed front-end circuit has the identified features of frequency compensation based on the state space theory and continuous gain with an exponential characteristic. The frequency compensation which appears only in the DSP unit of the digital hearing aid can upgrade the performance of the analog hearing aid in the field of low-frequency hearing loss. The continuous gain should meet the requirement of any input amplitude level, while its exponential characteristic leads to a large input dynamic range in accordance with the dB SPL (sound pressure level). Furthermore, the front-end circuit also provides a discrete knee point and discrete compression ratio to allow for high calibration flexibility. These features can accommodate users whose ears have different pain thresholds. Taking advantage of the current-mode technique, the MOS transistors work in the subthreshold region so that the quiescent current is small. Moreover, the input current can be compressed to a low voltage signal for processing according to the compression principle from the current-domain to the voltage-domain. Therefore, the objective of low voltage and low power (48 μW at 1.4 V) can be easily achieved in a high threshold-voltage CMOS process of 0.35 μm (VTON + |VTOP|≈ 1.35 V). The THD is below −45 dB. The fabricated chip only occupies the area of 1 × 0.5 mm2 and 1 × 1 mm2.

A Low-Power High-Performance Configurable Auto-Gain Control Loop for A Digital Hearing Aid Soc

A 65-Nm Low-Power High-Linearity ΣΔ ADC for Audio Applications

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

Research and Implementation of A Low-power High-linearity Audio ΣΔ ADC In 65nm Process

A High-Performance, Low-Power Σ Δ ADC for Digital Audio Applications

A High-Performance,Low-Power ΣΔ Modulator for Digital Audio Applications

Low-power High-Linearity Sigma-Delta Modulator for Audio Applications

Design of Analog Circuits in Multi-Bit Quantized Audio DAC

A Σδ Modulator Using Gain-Boost Class-C Inverter for Audio Applications.

A 65-Nm Low-Noise Low-Costς△modulator for Audio Applications

A 1.4-V 48-μW current-mode front-end circuit for analog hearing aids with frequency compensation

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

Analysis and Design of Wideband Low Noise Amplifier with Digital Control

An Ultra Low Power Sigma-Delta Modulator for Hearing Aid with Double-Sampling

A 90db DR Audio Delta-Sigma DAC with Headphone Driver for Hearing Aid

A Low Noise Low Distortion Automatic Gain Control Circuit

A 1-V 25-&Amp;#x00b5;w Low-Noise CMOS Programmable Gain Pre-Amplifier for Digital Hearing Aid

A Low Power 45-Db DR All-Digital Assisted AGC Loop for a GNSS Receiver in 0.18 Um CMOS

Low Power Audio Δ-Σ Digital-to-Analog Converter

An Optimized Design Strategy for the Hardware Implementation of the Hearing Aid Algorithms

A Low-power Digital-to-analog Converter for GSM Wireless Transmitters