Abstract:TiC is widely used as an ideal reinforcement to strengthen titanium matrix composites (TMCs). The morphology, size and distribution of TiC and the interfacial structure of TiC-Ti are crucial to obtain good mechanical properties of titanium matrix composites. These are keys to achieve superior strength and good ductility in titanium matrix composites. Hence, we investigated the effects of TiC generated in situ from different carbon sources (i.e., amorphous carbon nanoparticles , reduced graphene oxide and graphene nanoparticles) on the interfacial structure and mechanical properties of Ti60 alloy. Amorphous carbon nanoparticles (ACNS), reduced graphene oxide (rGO) and graphene nanoparticles (GNPs) reinforced Ti60 composites were prepared using spark plasma sintering (SPS). Among the three carbon nanomaterials, ACNs and rGO reacted with Ti60 matrix to form TiC, facilitating interfacial bonding. GNPs were not completely reacted with Ti60 matrix and residual on the interface owing to its poor dispersion effect, resulting in interfacial structure defects . The mechanical properties of the ACNs/Ti60 and rGO/Ti60 composites are high than GNPs/Ti60 composites. The ultimate tensile strengths of ACNs/Ti60 composites were 1173.49 MPa, 702.96 MPa and 653.13 MPa at room temperature, 600 °C and 650 °C, respectively, improving by 17.63%, 14.13% and 16.21% over Ti60, respectively. The superior mechanical properties are attributed to the fact that ACNs and rGO are more easily dispersed in the Ti60 matrix. The reaction activity of ACNs and rGO are higher than GNPs, and more TiC phase content was formed after sintering. TiC formed a semi-coherent interface with the Ti60 matrix, promoting the interfacial bonding strength. It also played a role in grain refinement and load transfer effect. This work helps to further elucidate the reinforcement effect of TiC formed by different carbon nanomaterials on TMC.

Catalytic effect of dopants on microstructure and performance of MCMB-derived carbon laminations

Effect of SiC dopant on microstructure of mesocarbon microbeads body

Effect of Nano-Sic on the Sintering Behavior and Properties of Calcined Carbon Derived from Mesocarbon Microbeads

A Novel Fabrication of Doped C/C Composite Laminations by Aqueous Tape Casting

Improving the performance of carbon composites by liquid phase activated sintering of MCMBs doped with Ti/Ni or Fe/Ni

Effect of catalytic condition on the properties of carbon nanotubes/calcium aluminate cement and its synthesis mechanism

In-Situ Doping B4C Nanoparticles in Mesophase Pitch for Preparing Carbon Fibers with High Thermal Conductivity by Boron Catalytic Graphitization

The Influence of Ball-Milling on Improving the Performance of Mesocarbon Microbeads Based Carbon Blocks

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Preparation and Characterization of Mesocarbon Microbeads by the Co-Polycondensation of High-Temperature Coal Tar Pitch and Coal Pyrolytic Extracts

Controllable Morphologies and Electrochemical Properties of Graphitizing MCMB-based Hybrids with Nanostructure Via a Simple Chemical Vapor Deposition Method

In-situ doping B4C nanoparticles in PAN precursors for preparing high modulus PAN-based carbon fibers with boron catalytic graphitization

Synergistic Catalytic Effect of Light Rare Earth Element and Other Additives on the Degree of Graphitization and Properties of Graphite

Catalytic Graphitization of Carbon/Carbon Composites by Lanthanum Oxide

Effects of carbon nanomaterials on interfacial structure and mechanical properties of high temperature Ti matrix composites

Catalytic carbon-bed sintering of CNTs/calcium aluminate cement and its effects on thermal mechanical properties of refractory castables

Fabrication and mechanical properties of in situ prepared mesocarbon microbead/carbon nanotube composites

Effect of Modification of SBA-15 by Carbon Films on Textural and Catalytic Properties of Supported Cobalt Catalysts

Kinetics Mechanism on the Efficiency of C Substituting B in the MgB2 Tape Fabrication

In Situ Preparation and Analysis of Bimetal Co-doped Mesoporous Graphitic Carbon Nitride with Enhanced Photocatalytic Activity

TiC-modified CNTs as reinforcing fillers for isotropic graphite produced from mesocarbon microbeads