Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. According to the statistical results of the reciprocating compressor maintenance in chemical enterprises, the probability of faults caused by wear or damage of vulnerable parts inside the cylinder is close to 80%. Now, fault diagnosis of vulnerable parts inside the cylinder is relied on vibration signal, acoustic emission signal, or thermal parameters. However, it is difficult to extract eigenvalues from vibration signals and acoustic emission signals, which can be disturbed by noise easily. Thermal parameters are relatively stable and less affected by noise. The measurement of thermal parameters requires drilling testing holes through the cylinder wall, which will decrease the strength of the cylinder. According to the working principle of the compressor, fault of the vulnerable parts inside the cylinder would change the pressure and temperature distribution at the suction and the discharge port of the cylinder, while these state parameters are monitored by the parameter monitoring system on most of the compressors. For these reasons, a fault prediction model based on state parameters learning is proposed in this paper aiming to fault diagnosis of vulnerable parts inside the cylinder, which could make fault prediction without adding new hardware cost, such as sensors. Optimized back propagation neural network method by genetic algorithm (GA-BP) is applied to establish the fault prediction model to describe normal working process of the compressor. When fault of vulnerable parts inside the cylinder occurs, monitored pressure and temperature would deviate from the predicted value by the fault prediction. The degree of the deviation is adopted to the fault diagnosis. Then, experiments simulating the fault condition were carried out, and it shows that the accuracy of fault diagnosis using this method could exceed 95%. Verification test shows that the proposed method could successfully predict the fault before the unplanned shutdown.

Fitting and Prediction Study of Compressor Characteristics Using Least Squares Support Vector Machine Technology

New Predictive Control Algorithms Based on Least Squares Support Vector Machines

Research on State Trend Prediction of Boiler Feed Pumps Based on LS-SVM

Prediction and Analysis of Pulverized Coal Ignition Temperature Based on a Least Square Supportive Vector Machine

Support Vector Machines-Based Method for Machining Error Prediction Modeling

Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine

The Engine Combustion Phasing Prediction Based on the Support Vector Regression Method

The Prediction of Spark-Ignition Engine Performance and Emissions Based on the SVR Algorithm

Research on Position Accuracy Forecasting Model of CO_2 Laser Micromachining Table

Current-carrying Fault Prediction of Electric Equipment Based on Least Squares Support Vector Machine

PSO Based LS-SVM Approach for Fault Prediction of Primary Air Fan

Performance evaluation of packed tower liquid desiccant dehumidifier based on LSSVM

A highly accurate method for forecasting the compressor geometric variable system based on the data-driven method

Thermal Error Prediction of Numerical Control Machine Tools Based on Least Squares Support Vector Machines

Utilization of ANN and ANFIS Models to Predict Variable Speed Scroll Compressor with Vapor Injection

Research on surrogate models and optimization algorithms of compressor characteristic based on digital twins

Least Squares Support Vector Machine with Self-Organizing Multiple Kernel Learning and Sparsity.

Online adaptive least squares support vector machine and its application in utility boiler combustion optimization systems

Application of state parameter learning for fault diagnosis on the large reciprocating compressor

Prediction of Vibration in Steam Turbine Shafting with Support Vector Machine

The application of support vector regression and virtual sample generation technique in the optimization design of transonic compressor