Abstract:An independent metering valve control hydraulic system (IMVCHS) adopts two independent valves to separately control the meter-in and meter-out orifices. This structure increases the degree of freedom of the control, and improves its flexibility and energy-saving performance. In this study, an IMVCHS was established that applies a control system developed to research the pressure and flow compound control performance. A two-level fuzzy control algorithm based on the calculated flow rate feedback from the spool displacement was proposed to realize high precision flow control, and the two-level fuzzy control algorithm based on the pressure feedback was also adopted to enhance the pressure performance under a dynamic load. A simulation model was established, and its key parameters identified experimentally using the simulated load of a hydraulic bridge circuit. The experimental results show that the proposed flow controller has higher control accuracy with an error of less than 2%, and the flow adjustment time for 40 L/min step control is 320 ms. The pressure controller with a two-level closed-loop fuzzy algorithm can significantly improve these pressure dynamic and static performances, and achieve a step response time of less than 180 ms. Combining the pressure and flow controllers, the pressure and flow compound control of the IMVCHS is realized, and the capacity for coping with load fluctuations is also identified, with compound adjustment times of generally less than 200 ms, and occasionally less than 100 ms. This control system therefore achieves a good performance for pressure and flow compound control, and is able to widen the application of independent metering control technology.

Analyses and Parameter Calculation of Mixing-pump Pressure-difference Control Method

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Experimental Analysis of the Thermal Stability of the Pressure Control Method for a Variable Flow Air-Conditioning Water System

Dynamic Hydraulic Misadjustment and Control for Variable Flow Heat-Supply Systems

Consistency Research on Constant Flow Regulation in User Side and Variable Flow Regulation of Equivalent Temperature Difference in Network

Constant-variable flow control and energy consumption analysis of indirect connection heating systems

Analysis of Pressure and Flow Compound Control Characteristics of an Independent Metering Hydraulic System Based on a Two-Level Fuzzy Controller

Method for Achieving Hydraulic Balance in Typical Chinese Building Heating Systems by Managing Differential Pressure and Flow

Adjustment of Individual Household Heat Metering systems

Adjustment Methods and Energy Consumption Analysis of Direct Connection Heat-supply System

HYDRAULIC CONDITION ANALYSIS OF A HEATING NETWORK WITH SELF-OPERATED PRESSURE DIFFERENCE CONTROL VALVE

Analysis of benefits yielded by pressure management in the area based on temperature revision

APPLICATION OF A MIXING WATER SYSTEM IN SUBSTATIONS

Control Method of Direct Connection of Metered Heating System and Existing Heat-supply Network

Equation of Flow Adjustment with Fixing Difference in Temperature Between Supply and Return Water of Indirect-Connected System with Heat Metering Based on Heat Load Ratio

Research on Control Schemes of Heat Exchange Unit for Household Metering Centralized Heating System

Selection of water-mixing connection structures and power analysis of pumps in heating system

Application of Mixing Pump in the Heating System of Existing Building

Performance Optimization of Space Heating Using Variable Water Flow Air Source Heat Pumps As Heating Source: Adopting New Control Methods for Water Pumps

Energy Conservation Analysis of Single-Pipe and Multi-heat Sources with Multi-pumps of Direct Connected System in Central Heating

Hydraulic calculation method alleviating vertical maladjustment in the household horizontal heating system