Abstract:Compared with the hydraulic configuration based on the conventional central circulating pump, a district heating system with distributed variable-speed-pumps configuration can often save 30-50% power consumption on circulating pumps with frequency inverters. However, the hydraulic regulations on distributed variable-speed-pumps configuration could be more complicated than ever while all distributed pumps need to be adjusted to their designated flow rates. Especially in a multi-source looped structure heating network where the distributed pumps have strongly coupled and severe non-linear hydraulic connections with each other, it would be rather difficult to maintain the hydraulic balance during the regulations. In this paper, with the help of the advanced automation and information technologies, a new hydraulic regulation method was proposed to achieve on-site hydraulic balance for the district heating systems with distributed variable-speed-pumps configuration. The proposed method was comprised of a new hydraulic model, which was developed to adapt the distributed variable speed-pumps configuration, and a calibration model with genetic algorithm. By carrying out the proposed method step by step, the flow rates of all distributed pumps can be progressively adjusted to their designated values. A hypothetic district heating system with 2 heat sources and 10 substations was taken as a case study to illustrate the feasibility of the proposed method. Two scenarios were investigated respectively. In Scenario I, the flow rate of one substation varied according to its heat demand and the flow rates of other substations maintained their original values. And in Scenario II, the flow rates of all substations varied synchronously with the same relative rate. The results of the both scenarios indicated that all pumps could be properly adjusted to their designated flow rates by the proposed method with a high frequency adjustment resolution as 0.001 Hz. In scenario I, compared with the district heating system with distributed variable-speed-pumps configuration, the power consumption would be 26.6-66.8% less than that of the conventional central circulating pump configuration during the 4 rounds of regulations. In scenario II, the energy saving ratio of the district system with distributed variable-speed-pumps configuration would be 36.1-90.3% less than that of the conventional central circulating pump configuration during the 5 rounds of regulations. (C) 2017 Elsevier Ltd. All rights reserved.

Dynamic Hydraulic Misadjustment and Control for Variable Flow Heat-Supply Systems

PRINCIPLES FOR CHOOSING STATIC OPERATION POINTS AND SIMULATION ANALYSIS OF FLUID POWER SYSTEM BASED ON SEPARATE CONTROL OF ACTUATOR PORTS

Moedling and Control Strategy of a Multi-Pump Multi-Actuator Hydraulic System with On/Off Valve Matrix

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Study and Realization of Automatic Control for Variable Flow Heating Systems

Maintaining Uniform Hydraulic Conditions with Intelligent On–off Regulation

HYDRAULIC CONDITION ANALYSIS OF A HEATING NETWORK WITH SELF-OPERATED PRESSURE DIFFERENCE CONTROL VALVE

Experimental Analysis of the Thermal Stability of the Pressure Control Method for a Variable Flow Air-Conditioning Water System

Consistency Research on Constant Flow Regulation in User Side and Variable Flow Regulation of Equivalent Temperature Difference in Network

Dynamic Analysis of Thermodynamic Stability in Variable Water Flow HVAC System

Method for Achieving Hydraulic Balance in Typical Chinese Building Heating Systems by Managing Differential Pressure and Flow

Analysis of Pressure and Flow Compound Control Characteristics of an Independent Metering Hydraulic System Based on a Two-Level Fuzzy Controller

THERMODYNAMIC STABILITY ANALYSIS OF DIFFERENTIAL PRESSURE CONTROL STRATEGIES IN VWF SYSTEM

A New Hydraulic Regulation Method on District Heating System with Distributed Variable-Speed Pumps

Air-source Heat Pump Heating System with a New Temperature and Hydraulic-Balance Control Strategy: A Field Experiment in a Teaching Building

Decoupling Control and Simulation for Variable Flow Heating Systems

A Simulation-Based Study on Different Control Strategies for Variable-Speed Pumps in Distributed Ground-Source Heat Pump Systems

Performance Optimization of Space Heating Using Variable Water Flow Air Source Heat Pumps As Heating Source: Adopting New Control Methods for Water Pumps

Dynamic Simulation and Control of Hydraulic Cases for Central Heating and Air-Conditioning System

Reliable Simultaneous Operation Strategy in Heat Exchanger Networks under Variable Heat Loads

Advanced Valves and Pump Coordinated Hydraulic Control Design to Simultaneously Achieve High Accuracy and High Efficiency.