Abstract:In this paper, novel syntactic foams (CPSFs) composed of the rigid polyurethane foam (PUR) and the fly ash cenospheres were prepared through the pressure infiltration approach. The aluminum honeycombs were proposed to improve the mechanical response of CPSFs by internally restricting the lateral deformation. The influences of the cenospheres size and the reinforcement on the dynamic behavior of the CPSFs were specified. The dynamic compression tests were carried out for the plain and Al honeycomb reinforced CPSFs with the strain rate ranging from 0.001/s to 2000/s. The results shown that the dynamic strength of the CPSFs containing large cenospheres was 35%–77% higher than that under quasi-static compression. But, the plateau stress was insensitive to the strain rate because the main failure mechanism of the CPSFs at different stages was dominated by different material compositions. The dynamic compressive strength and plateau stress of the plain CPSFs containing small cenospheres shown obvious strain rate sensitivity. The failure mechanism of the two plain CPSFs both transformed from shear failure into longitudinal cracking with the loading condition changed from the quasi-static to high-velocity impact. For the reinforced CPSFs, the dynamic mechanical properties including the strength and the plateau stress were sensitive to the strain rate. The failure mode of the reinforced CPSFs was dominated by the gradual compressive deformation. It was suggested that the Al honeycombs can not only enhance the mechanical properties, but also improve the dynamic response of the CPSFs. As a consequence, the dynamic energy absorption of the CPSFs varied in the range of 7–14 MJ/m3, and was about 23%–32% higher than that under static compression. This study expects to provide a potential approach in disposing the industrial waste and an innovation to adopt the internal constraints to improve mechanical behaviors of syntactic foams.

Preparation and Characterization of Colloidal Carbon Sphere/Rigid Polyurethane Foam Composites

Preparation of monodisperse polystyrene particles and assembly of spherical colloidal crystals

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Effect of Surface Modifications of Carbon Black (CB) on the Properties of CB/polyurethane Foams

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Study on preparation and performance of PEG-based polyurethane foams modified by the chitosan with different molecular weight

Preparation and Characterization of Cellulose Fiber/chitosan Composites

Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PAPI.

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Integrated preparation and properties of polyurethane‐based sandwich structure composites with foamed core layer

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Effect of the cenospheres size and internally lateral constraints on dynamic compressive behavior of fly ash cenospheres polyurethane syntactic foams

Giant Cushioning Effect in Facile Polymer/Nanoclay-Coated Flexible Polyurethane Foams

Effect of fiber surface treatment on the structure and properties of rigid bagasse fibers/polyurethane composite foams

Preparation and characterization of nanocomposite polyurethane.

Mechanical property and thermal stability of short carbon fiber reinforced polysulfonamide composites

In-depth investigation of how carbon nanofiller dispersion affects microcellular foaming behavior in poly(butylene succinate) nanocomposites

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Preparation of styrene‐phenylamine monomer copolymer nanospheres and its performance for stabilizing CO2 foam

Preparations of Polyurethane Foam Composite (PUFC) Pads Containing Micro-/Nano-Crystalline Cellulose (MCC/NCC) toward the Chemical Mechanical Polishing Process