Abstract:The automobile industry relies primarily on spot welding operations, particularly resistance spot welding (RSW). The performance and durability of the resistance spot-welded joints are significantly impacted by the welding quality outputs, such as the shear force, nugget diameter, failure mode, and the hardness of the welded joints. In light of this, the present study sought to determine how the aforementioned welding quality outputs of 0.5 and 1 mm thick austenitic stainless steel AISI 304 were affected by RSW parameters, such as welding current, welding time, pressure, holding time, squeezing time, and pulse welding. In order to guarantee precise evaluation and experimental analysis, it is essential that they are supported by a numerical model using an intelligent model. The primary objective of this research is to develop and enhance an intelligent model employing artificial neural network (ANN) models. This model aims to provide deeper knowledge of how the RSW parameters affect the quality of optimum joint behavior. The proposed neural network (NN) models were executed using different ANN structures with various training and transfer functions based on the feedforward backpropagation approach to find the optimal model. The performance of the ANN models was evaluated in accordance with validation metrics, like the mean squared error (MSE) and correlation coefficient (R2). Assessing the experimental findings revealed the maximum shear force and nugget diameter emerged to be 8.6 kN and 5.4 mm for the case of 1-1 mm, 3.298 kN and 4.1 mm for the case of 0.5-0.5 mm, and 4.031 kN and 4.9 mm for the case of 0.5-1 mm. Based on the results of the Pareto charts generated by the Minitab program, the most important parameter for the 1-1 mm case was the welding current; for the 0.5-0.5 mm case, it was pulse welding; and for the 0.5-1 mm case, it was holding time. When looking at the hardness results, it is clear that the nugget zone is much higher than the heat-affected zone (HZ) and base metal (BM) in all three cases. The ANN models showed that the one-output shear force model gave the best prediction, relating to the highest R and the lowest MSE compared to the one-output nugget diameter model and two-output structure. However, the Levenberg-Marquardt backpropagation (Trainlm) training function with the log sigmoid transfer function recorded the best prediction results of both ANN structures.

Study on Weld Quality Control of Resistance Spot Welding Using a Neuro-Fuzzy Algorithm

Online quality inspection of resistance spot welding for automotive production lines

Online Quality Inspection of Ultrasonic Composite Welding by Combining Artificial Intelligence Technologies with Welding Process Signatures

The Research On The Neuro-Fuzzy Network Control Strategy For Electric Discharge Machining Process

Quality Evaluation of Resistance Spot Welding Based on Dynamic Reactance Signal and Radar Diagram Method

Monitoring of Resistance Spot Welding Process

A new method for nondestructive quality evaluation of the resistance spot welding based on the radar chart method and the decision tree classifier

Statistical Method to Model the Quality Inconsistencies of the Welding Process

A new online quality monitoring method of chain resistance upset butt welding based on Isolation Forest and Local Outlier Factor

Finite element simulation of welding process and real-time monitoring assessment

Research on online intelligent welding system based on resistance spot welding of aluminum galvanized steel

Machine learning tool for the prediction of electrode wear effect on the quality of resistance spot welds

The Intelligent Methodology for Monitoring the Dynamic Welding Quality Using Visual and Audio Sensor

Welding Quality Monitoring of High Frequency Straight Seam Pipe Based on Image Feature

Autonomous nondestructive evaluation of resistance spot welded joints

Online monitoring of resistance spot welding electrode wear state based on dynamic resistance

Prediction of welding residual stress and deformation in electro-gas welding using artificial neural network

Improving RSW nugget diameter prediction method: unleashing the power of multi-fidelity neural networks and transfer learning

Artificial Neural Networks and Experimental Analysis of the Resistance Spot Welding Parameters Effect on the Welded Joint Quality of AISI 304

Online detection of weld surface defects based on improved incremental learning approach

Study on Quality Prediction of 2219 Aluminum Alloy Friction Stir Welding Based on Real-Time Temperature Signal