Abstract:High-level waste (HLW) produced from reprocessing of the spent nuclear fuel still contains actinides, 90Sr, 137Cs, etc., which presents a significant hazard to the environment. A total-partitioning process for HLW was developed at the Institute of Nuclear and New Energy Technology (INET), Tsinghua University, China. This process includes the removal of actinides by the TRPO process, the removal of 90Sr by a crown ether strontium extractions (CESE) process, and the removal of 137Cs by ion exchange with potassium titanium hexacyanoferrate. A pilot test was carried out using simulated HLW, where 24 stages of 70mm centrifugal contactors were used in the stripping section of the TRPO process for the removal of actinides in the loaded 30% TRPO-kerosene. The hydraulic tests of the cascade were carried out to determine the operational parameters including both the rotor speed and diameter of the heavy-phase weir of every stage. A mass-transfer test of the cascade was carried out. The test results showed that 99.9% of the Nd and 99.9% of the Zr were stripped by 5.5mol/L HNO3 and 0.6mol/L H2C2O4, respectively, and 99.6% of the Fe and 99.7% of the Mo were stripped in the whole stripping section. A pilot test of the total partitioning process for 72h was also performed. In this test, U was added into the simulated HLW after the 66th hour. The test result showed that 99.9% of the Nd, 99.9% of the Zr, and 99.9% of the U were stripped, respectively. The organic phase was recycled after being stripped and scrubbed. During the 72-h pilot test, 24-stage 70mm centrifugal contactors worked in a stable manner and continuously with no stage failures or interruptions in operation, which demonstrated that these centrifugal contactors were promising for the stripping section of the TRPO process.

DEVELOPMENT OF COMPACT MINIATURE ANNULAR CENTRIFUGAL CONTACTOR FOR HOT CELL PLACEMENT

Development of a ϕ20mm annular centrifugal contactor for the hot test of the total TRPO process

Development and Performance of a New Annular Centrifugal Contactor for Semi‐Industrial Scale

Miniature centrifugal contactor for radiochemical separation

Recent advances of annular centrifugal extractor for hot test of nuclear waste partitioning process

Development of Annular Centrifugal Contactors for TRPO Process Tests

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

APPLICATION OF MINIATURE CENTRIFUGAL CONTACTORS FOR TREATING HIGH-LEVEL LIQUID WASTE

Recent Advances in the Development and Application of Annular Centrifugal Contactors in the Nuclear Industry

Application Of 70-Mm-Dia Centrifugal Contactors In Pilot Plant Tests Of Two Simplified Trpo Processes With Simulated High Level Waste

Application Ofφ70 Mm Centrifugal Contactors in a Pilot Test of the Total Partitioning Process Using Simulated High‐Level Waste

Development and Performance of a Glass Fiber Reinforced Plastic Centrifugal Contactor

CFD Simulations of the Air/Water Two-phase Flow in an Annular Centrifugal Contactor

Test Stand Design And Construction For High Intensity Cyclotron Developement

Effects of some parameters on mass-transfer efficiency of a 20 mm annular centrifugal contactor for nuclear solvent extraction processes

Development and Testing of a 300-Kvar HTS Synchronous Condenser Prototype

Comprehensive test stand for high-intensity cyclotron development

ICONE23-1913 DESIGN AND STUDY OF ENGINEERING TEST FACILITY : HELIUM CIRCULATOR

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Theoretical and Experimental Investigation of a Small-Scale, High-Speed, and Oil-Free Radial Anode Off-Gas Recirculation Fan for Solid Oxide Fuel Cell Systems

Demonstration of an Improved Total Partitioning Process for High Level Liquid Waste Using Annular Centrifugal Contactors