Abstract:A micro-biosensor was constructed by incorporating the organic conducting salt tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ) into a platinized platinum (Pt) wire and further covering with the electrochemical polymerical heteropolypyrrole film, in which glucose oxidase (GOx) was entrapped. The enzyme electrode can sensitively determine glucose at a low working potential, mainly based on the oxidation of H2O2. The incorporated TTF-TCNQ can significantly improve the oxidation of H2O2 on the electrode, although a part of the TTF-TCNQ functions as a mediator. Compared with the same electrode prepared without TTF-TCNQ incorporated, the TTF-TCNQ modified electrode had better performance characteristics at a working potential of 200 mV (versus SCE). The response time to 90% of the steady value was shortened from about 40 s to less than 10 s, the lower limit of the linear response was greatly extended from about 1.6 mM to 10 mu M, the linear range was shifted from 1.6-10.0 to 0.01-5 mM and the sensitivity was increased from about 1 to 1.5 mu A/mM. The electrode was quite stable. For continuous operation, the electrode could work for about 5 weeks and only lost 60% of its original sensitivity. Stored at 4 degrees C for intermittent determinations, the electrode kept 80% sensitivity for over 6 months. Due to covering the electrode with a non-conductive heteropolypyrrole film, ascorbate, urate and 4-acetamidophenol caused only negligible current response at an applied potential of 200 mV. (C) 1999 Elsevier Science S.A. All rights reserved.

Investigations on the Reduction of Molecular Oxygen on Polyphenol Oxidase-Modified Electrode

Spectroscopic Studies On Ph-Induced Changes In Secondary Structure Of Pophenol Oxidase From Tobacco

Electrocatalytic Reduction and Determination of Dissolved Oxygen at a Poly(nile blue) Modified Electrode

Activation of Tobacco Leaf Polyphenol Oxidase by Sodium Dodecyl Sulfate

Preparation of Poly-O-phenylenediamine Modified Glassy Carbon Electrode and Its Electrocatalytic Properties

The purification of polyphenol oxidase from tobacco.

On-line Monitoring of Transient Radicals and Oligomers: O-Phenylenediamine Electrooxidation Mechanism Study by Mass Spectrometry

Electrochemical Characterization of Catalytic Activities of Manganese Oxides to Oxygen Reduction in Alkaline Aqueous Solution

Molecular-level Insights into Intrinsic Peroxidase-Like Activity of Nanocarbon Oxides.

Electrooxidative Polymerization of Phenothiazine Derivatives on Screen-Printed Carbon Electrode and Its Application to Determine Nadh in Flow Injection Analysis System

Polycrystalline bismuth oxide films for development of amperometric biosensor for phenolic compounds.

UV/VIS SPECTRA STUDIES ON THE POLYPHENOL OXIDASE II (PPO II) FROM TOBACCO

Electrocatalytic oxidation of nitrophenols in aqueous solution using modified PbO 2 electrodes

Electroreduction of P-Nitrophenol by Surfactant Modified Electrodes

Electrochemical Polymerization of Toluidine Blue O and Its Electrocatalytic Activity Toward Nadh Oxidation

A New Catechol Biosensor Immobilized Polyphenol Oxidase by Combining Electropolymerization and Cross-Linking Process

Electrocatalytic oxidation of nitrophenols in aqueous solution using modified PbO<sub>2 </sub>electrodes

A novel electroactive polymer for pH‐independent oxygen sensing

Characterization of Polyphenol Oxidase from Jipicao Yam

Improvement of the Performance of H2O2 Oxidation at Low Working Potential by Incorporating TTF-TCNQ into a Platinum Wire Electrode for Glucose Determination.

The Effects of Concentration and Solution Ph on the Kinetic Parameters for the Electrocatalytic Oxidation of Dihydronicotiamide Adenine Dinucleotide (NADH) at Glassy Carbon Electrode Modified with Electropolymerized Film of Toluidine Blue O