Abstract:The Booth multiplier has been widely used for high performance signed multiplication by encoding and thereby reducing the number of partial products. A multiplier using the radix-$4$ (or modified Booth) algorithm is very efficient due to the ease of partial product generation, whereas the radix- $8$ Booth multiplier is slow due to the complexity of generating the odd multiples of the multiplicand. In this paper, this issue is alleviated by the application of approximate designs. An approximate $2$ -bit adder is deliberately designed for calculating the sum of $1\times$ and $2\times$ of a binary number. This adder requires a small area, a low power and a short critical path delay. Subsequently, the $2$ -bit adder is employed to implement the less significant section of a recoding adder for generating the triple multiplicand with no carry propagation. In the pursuit of a trade-off between accuracy and power consumption, two signed $16\times 16$ bit approximate radix-8 Booth multipliers are designed using the approximate recoding adder with and without the truncation of a number of less significant bits in the partial products. The proposed approximate multipliers are faster and more power efficient than the accurate Booth multiplier. The multiplier with 15-bit truncation achieves the best overall performance in terms of hardware and accuracy when compared to other approximate Booth multiplier designs. Finally, the approximate multipliers are applied to the design of a low-pass FIR filter and they show better performance than other approximate Booth multipliers.

Design of Radix16 Booth Pipeline Multiplier

High Quality Multiplier Design Based on Improved Circuits

VHDL implementation of 16x16 multiplier using pipelined 16x8 modified Radix-4 booth multiplier

A Hybrid Multiplier Architecture Using Partially Redundant Booth Algorithm

Design and Implementation of Radix 8 Booth Encoding Multiplier for Low Area and High-Speed Applications

Implementation and Comparison of Radix-8 Booth Multiplier by using 32-bit Parallel prefix adders for High Speed Arithmetic Applications

Design of a fast multiplier used in 32Kb/s ADPCM

Design of High-Speed Reconfigurable 16×16 Multiplier

A Design and Implementation of Radix-4 Based Fast Multiplier on FPGA

Implementation of Booth Multiplier Algorithm using Radix-4 in FPGA

A New Redundant Binary Booth Encoding for Fast 2N-Bit Multiplier Design

Asic Implementation of 12-Bit Radix-8 Booth Multiplier

A 64X64-Bit Modified Booth Multiplier Utilizing Multiplexer-Select Booth Encoder

Hardware Implementation of a High Speed Floating Point Multiplier Based on FPGA

Design of low-power and high-speed multiplier

Implementation of ALU Using Modified Radix-4 Modified Booth Multiplier

Approximate Radix-8 Booth Multipliers for Low-Power and High-Performance Operation

Design of a Fast Modular Multiplier

Booth Multiplier Design Using Modified Square Root Carry-Select-Adder

Design and Implementation of Area Efficient Low Latency Radix-8 Multiplier on FPGA