Abstract:A multi-modulus architecture based on the radix-8 Booth encoding of a modulo (2n − 1) multiplier, a modulo (2n) multiplier, and a modulo (2n + 1) multiplier is proposed in this paper. It uses the original single circuit and shares many common circuit characteristics with a small extra circuit to carry out multi-modulus operations. Compared with a previous radix-4 study, the radix-8 architecture can increase the modulation multiplication encoding selection from three codes to four codes. This reduces the use of partial products from ⌊n/2⌋ to ⌊n/3⌋ + 1, but it increases the operation complexity for multiplication by three circuits. A hard multiple generator (HMG) is used to address this problem. Two judgment signals in the multi-modulus circuit can be used to perform three operations of the modulo (2n − 1) multiplier, modulo (2n) multiplier, and modulo (2n + 1) multiplier at the same time. The weighted representation is used to reduce the number of partial products. Compared with previously reported methods in the literature, the proposed approach can achieve better performance by being more area-efficient, being faster, consuming low power, and having a lower area-delay product (ADP) and power-delay product (PDP). With the multi-modulus HMG, the proposed modified architecture can save 34.48–55.23% of hardware area. Compared with previous studies on the multi-modulus multiplier, the proposed architecture can save 22.78–35.46%, 4.12–11.15%, 12.59–24.73%, 27.88–38.88%, and 20.49–27.85% of hardware area, delay time, dissipation power, ADP, and PDP, respectively. Xilinx field programmable gate array (FPGA) Vivado 2019.2 tools and the Verilog hardware description language are used for synthesis and implementation. The Xilinx Artix-7 XC7A35T-CSG324-1 chipset is adopted to evaluate the performance.

Design and Implementation of Radix 8 Booth Encoding Multiplier for Low Area and High-Speed Applications

High Quality Multiplier Design Based on Improved Circuits

Implementation and Comparison of Radix-8 Booth Multiplier by using 32-bit Parallel prefix adders for High Speed Arithmetic Applications

Design and Implementation of Area Efficient Low Latency Radix-8 Multiplier on FPGA

Asic Implementation of 12-Bit Radix-8 Booth Multiplier

A modular technique of Booth encoding and Vedic multiplier for low-area and high-speed applications

Implementation of Booth Multiplier Algorithm using Radix-4 in FPGA

Design of an Accurate, Cost-effective Radix-4 Booth Multiplier

Approximate Radix-8 Booth Multipliers for Low-Power and High-Performance Operation

VHDL implementation of 16x16 multiplier using pipelined 16x8 modified Radix-4 booth multiplier

A Design and Implementation of Radix-4 Based Fast Multiplier on FPGA

Booth Multiplier Design Using Modified Square Root Carry-Select-Adder

High Speed Low Power Radix 4 Approximate Booth Multiplier

Implementation of ALU Using Modified Radix-4 Modified Booth Multiplier

A Combined Arithmetic-High-Level Synthesis Solution to Deploy Partial Carry-Save Radix-8 Booth Multipliers in Datapaths

Approximate radix-8 Booth multiplier for low power and high speed applications

AxBMs: Approximate Radix-8 Booth Multipliers for High-Performance FPGA-Based Accelerators

Area-Power-Delay-Efficient Multi-Modulus Multiplier Based on Area-Saving Hard Multiple Generator Using Radix-8 Booth-Encoding Scheme on Field Programmable Gate Array

Design and implementation of hybrid (radix-8 Booth and TRAM) approximate multiplier using 15-4 approximate compressors for image processing application