Abstract:The outstand flanges of aluminium alloy angles are sensitive to local buckling due to the low elastic modulus of material. To improve the sectional buckling stress, lips could be introduced to improve the stability behaviour of the outstand flanges. This paper presents an equilibrium approach and a simplified energy method for the local and distortional buckling of extruded aluminium alloy lipped angle columns. Closed form solutions for local buckling and distortional buckling are proposed. The equivalent flexural rigidity and torsional rigidity of the lip are two main factors affecting the sectional buckling behaviour. As distinct from double-sided symmetrical edge stiffeners, the bending of a single-sided edge stiffener can lead to in-plane compressive deformation of the adjacent flange. Based on the edge-stiffened flange model, the equivalent flexural rigidity of the lip is obtained from finite element (FE) analysis. To validate the proposed analytical methods, the elastic buckling coefficients of lipped angles with varying dimensions are obtained from eigenvalue buckling analysis. Lips of different thicknesses are considered to study the effect of torsional rigidity. Comparing with FE results, the proposed equilibrium approach shows excellent accuracy for both local and distortional buckling stresses. The closed form solution given by energy method can also well predict the sectional buckling stress. Finally, parametric studies are carried out to further investigate the effects of flexural and torsional rigidities of lips and the slenderness ratios of flanges on the elastic buckling behaviour. Some design remarks are concluded to provide valuable reference for the application of extruded aluminium alloy lipped angles in practice.

COMPARISON OF STABILITY CAPACITY AND ECONOMIC PERFORMANCE BETWEEN LIPPED H-SECTION MEMBERS AND H-SECTION MEMBERS

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

COMPARISON OF EFFECTIVE LENGTH COEFFICIENT OF CONSTANT-SECTION STEEL FRAME-COLUMN BETWEEN CHINESE AND AMERICAN DESIGN SPECIFICATIONS

LOAD-CARRYING CAPACITY OF LIPPED H-SECTION MEMBERS UNDER AXIAL LOAD

Local and Distortional Buckling of Extruded Aluminium Alloy Lipped Angle Columns

ON STABILITY OF I-SECTION STEEL CANTILEVERS

LOCAL AND DISTORTIONAL BUCKLINGS OF DIFFERENT INCLINED LIPPED PURLINS

A Comparative Study of Alternative Approaches for Stability Design of Steel Frames

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Stability analysis method for lattice shells accounting for buckling of members

LOCAL AND DISTORTIONAL BUCKLING OF COLD-FORMED C AND Z-SECTION MEMBERS UNDER BENDING

Distortional and Lateral Buckling of Z-Purlins with Sloping Lips in Flexure

Nonlinear FEA of Stability Bearing Capacity of Shuttle-Shaped Steel Lattice Columns with Bending Moment

RESEARCH ON LOCAL BUCKLING OF LIPPED H-SECTION MEMBERS

Buckling study of lipped-H section members

RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING

LATERAL STABILITY BEHAVIOR OF LIPPED H-SECTION BEAMS SUBJECTED TO MOMENTS

THE MECHANICAL PERFORMANCE OF SINGLE DIAGONAL LACING DOUBLE-WEB STAY MEMBERS OF OPEN CONCRETE FILLED STEEL TUBES WITH FOUR MAIN ELEMENTS

Buckling of Piecewise Member Composed of Steel and High-Strength Materials in Axial Compression

LIMIT STRENGTH OF LIPPED H-SECTION MEMBERS UNDER BOTH COMPRESSION AND BENDING

Buckling behavior of cold-formed steel sigma and lipped channel section beam-columns: Experimental and numerical investigation