Abstract:The analytical solution is derived for the plane strain stress field around a cylindrical void in a hexagonal close-packed single crystal with three in-plane slip systems oriented at the angle π/3 with respect to one another. The critical resolved shear stress on each slip system is assumed to be equal. The crystal is loaded by both internal pressure and a far-field equibiaxial compressive stress. The deformation field takes the form of angular sectors, called slip sectors, within which only one slip system is active; the boundaries between different sectors are radial lines. The stress fields are derived by enforcing equilibrium and a rigid, ideally plastic constitutive relationship, in the spirit of anisotropic slip line theory. The results show that each slip sector is divided into smaller regions denoted as stress sectors and the stress state valid within each stress sector is derived. It is shown that stresses are unique and are continuous within stress sectors and across stress sector boundaries, but the gradient of stresses is not continuous across the boundaries between stress sectors. The solution shows self-similarity in that the stresses over the entire domain can be determined from the stresses within a small region adjacent to the void by invoking certain scaling and symmetry properties. In addition, the stress state exhibits periodicity along logarithmic spirals which emanate from the void. The results predict that the mean value of in-plane pressure required to activate plastic deformation around a void in a single crystal can be higher than that necessary for a void in an isotropic material and is sensitive to the orientation of the slip systems relative to the void.

A steady line heat source in a decagonal quasicrystalline half-space

Certain problems in constrained cubic quasicrystals: Half-space Green’s functions

Steady State Thermoelastic Contact Problem of One-Dimensional Hexagonal Quasicrystals

The general solution of one-dimensional hexagonal quasicrystal

A Finite Crack in a Half-Plane under Uniform Heat Flux or Surface Heat Source

Interaction Between A Semi-Infinite Crack and A Straight Dislocation in A Decagonal Quasicrystal

GREEN FUNCTIONS FOR A DECAGONAL QUASICRYSTALLINE MATERIAL WITH A PARABOLIC BOUNDARY

Cylindrical void in a rigid-ideally plastic single crystal III: Hexagonal close-packed crystal

An Edge Dislocation and a Heat Source at the Center of a Multicoated Circular Inhomogeneity

Two Non‐elliptical Decagonal Quasicrystalline Inclusions with Internal Uniform Hydrostatic Phonon Stresses

Three-Dimensional Fundamental Thermo-Elastic Solutions Applied To Contact Problems

Frictional Contact of One-Dimensional Hexagonal Quasicrystal Coating Considering Thermal Effects

Stress singularity of one-dimensional hexagonal piezoelectric quasicrystal composites due to thermal effect

Thermal Stressed State of a Half Space with Free or Rigidly, Smoothly, or Flexibly Fastened Boundary Under the Conditions of Heat Insulation in a Domain Located in the Plane Parallel to the Boundary

An elliptical inhomogeneity under nonuniform heat flux

Analytical solutions for some defect problems in 1D hexagonal and 2D octagonal quasicrystals

The interaction between a piezoelectric screw dislocation and collinear rigid lines in one-dimensional hexagonal quasicrystals

The Thermoelastic Contact Problem of One-Dimensional Hexagonal Quasicrystal Layer with Interfacial Imperfections

Elastic field for a blunt crack in a decagonal quasicrystalline material

DECAGONAL QUASICRYSTALLINE ELLIPTICAL INCLUSIONS UNDER THERMOMECHANICAL LOADING

Indentation on Two-Dimensional Hexagonal Quasicrystals