Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Thermal Stressed State of a Half Space with Free or Rigidly, Smoothly, or Flexibly Fastened Boundary Under the Conditions of Heat Insulation in a Domain Located in the Plane Parallel to the Boundary

Time-dependent analysis of 3D thermo-mechanical behavior of a layered half-space with anisotropic thermal diffusivity

Quasi-static Thermal Analyses of Layered Compressible Poroelastic Materials with a Finite Depth or Half-Space

"THERMOELASTIC DISPLACEMENT AND TEMPERATURE RISE IN A HALF-SPACE DUE TO A STEADY-STATE HEAT FLUX "

Thermal State of a Region with a Thermally Insulated Moving Boundary

Two-Dimensional Green'S Functions for Semi-Infinite Isotropic Thermoelastic Plane

2D Green'S Functions for Two-Phase Orthotropic Electro-Magneto-Thermo-Elastic Materials

General Boundary-Value Problems for the Heat Conduction Equation with Piecewise-Continuous Coefficients

Thermoelastic problems in the half space—An application of the general solution in elasticity

Thermoelastic State of a Piecewise Inhomogeneous Orthotropic Thermosensitive Cylinder

Thermoelastic State of a Heterogeneous Orthotropic Cylindrical Shell with an Open Profile under Transient Heating

Dissipation of boundary effects in multilayer heat conduction problems

An Asymptotic Local Solution for Axi-Symmetric Heat Conduction Problems with Temperature Discontinuity on the Boundary

Boundary-Value Problems for the Helmholtz Equation for a Half-Plane with a Lipschitz Inclusion

An elliptical inhomogeneity under nonuniform heat flux

Transient response of two-temperature axisymmetric fractional thermo-diffusive elastic half-space with variable thermal conductivity and diffusivity

Effect of a thin surface coating layer on thermal stresses within an elastic half-plane

Temperature-dependent thermal conductivity in Green–Naghdi (type III) thermoelastic half-space with hydrostatic initial stress

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

Two-phase heat conduction problems with Sturm-type boundary conditions

Thermoelastic Stresses in a Uniformly Heated Functionally Graded Isotropic Hollow Cylinder