Abstract:This study reports the fabrication and performances of hybrid proton-conducting membranes by dispersing nanosized solid superacid inorganic fillers, TiO2–SO42− (STiO2), into chitosan (CS) matrix. Fourier transform infrared spectra demonstrate intermolecular interactions between STiO2 and chitosan segmental chains. High resolution scanning electron microscope characterization reveals an essentially homogeneous dispersion of the solid superacid fillers within chitosan matrix. The incorporation of the superacid fillers leads to a reduced fractional free volume (FFV) of the hybrid membranes as confirmed by positron annihilation lifetime spectroscopy (PALS) analysis. This reduced FFV and more tortuous pathway significantly enhance the methanol diffusion resistance through the membranes, resulting in a decreased methanol crossover. Under identical conditions, compared with TiO2 embedded membranes, the STiO2-filled hybrid membranes exhibit simultaneously improved methanol barrier and proton transport properties due to the enhanced interfacial interaction and proton conductive ability. Moreover, compared with Nafion 117 membrane, all the STiO2-filled hybrid membranes display much lower methanol crossover whereas the proton conductivity of the membranes remains high enough for DMFC applications. Meanwhile, due to the interfacial interactions between STiO2 and chitosan chains, the hybrid membranes exhibit an enhanced mechanical strength and adequate thermal stability as verified by mechanical strength characterization and thermogravimetric analysis.

Simultaneously enhanced methanol barrier and proton conductive properties of phosphorylated titanate nanotubes embedded nanocomposite membranes

Enhanced Proton Conductivities of Chitosan-Based Membranes by Inorganic Solid Superacid SO42−–TiO2 Coated Carbon Nanotubes

Preparation and properties of hybrid direct methanol fuel cell membranes by embedding organophosphorylated titania submicrospheres into a chitosan polymer matrix

The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances

Chitosan/titanate Nanotube Hybrid Membrane with Low Methanol Crossover for Direct Methanol Fuel Cells

Composite Proton Exchange Membranes Based on Inorganic Proton Conductor Boron Phosphate Functionalized Multi-Walled Carbon Nanotubes and Chitosan

Hierarchical layered double hydroxide coated carbon nanotube modified quaternized chitosan/polyvinyl alcohol for alkaline direct methanol fuel cells

SCTF Nanosheets@sulfonated Poly (P-Phenylene-co-aryl Ether Ketone) Composite Proton Exchange Membranes for Passive Direct Methanol Fuel Cells

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Fabrication and performances of solid superacid embedded chitosan hybrid membranes for direct methanol fuel cell

Novel Methanol-Blocking Proton Exchange Membrane Achieved Via Self-Anchoring Phosphotungstic Acid into Chitosan Membrane with Submicro-Pores

A Poly(vinyl Alcohol)-Based Composite Membrane with Immobilized Phosphotungstic Acid Molecules for Direct Methanol Fuel Cells

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Novel Sulfonated Poly (ether Ether Ketone)/Phosphonic Acid-Functionalized Titania Nanohybrid Membrane by an in Situ Method for Direct Methanol Fuel Cells

Tuning The Performance Of Direct Methanol Fuel Cell Membranes By Embedding Multifunctional Inorganic Submicrospheres Into Polymer Matrix

Sulfonated Silica Coated Polyvinylidene Fluoride Electrospun Nanofiber-Based Composite Membranes for Direct Methanol Fuel Cells

Proton Conducting Membranes Prepared by Incorporation of Organophosphorus Acids into Alcohol Barrier Polymers for Direct Methanol Fuel Cells

Evaluation and Optimization of Polycarbonate Track-Etched (PCTE) Membranes for Direct Methanol Fuel Cells.

Increases in the proton conductivity and selectivity of proton exchange membranes for direct methanol fuel cells by formation of nanocomposites having proton conducting channels

Modification of sulfonated poly (etherether ketone) composite polymer electrolyte membranes with 2D molybdenum disulfide nanosheet-coated carbon nanotubes for direct methanol fuel cell application

Novel Pore-Filling Membrane Based on Block Sulfonated Poly (ether Sulphone) with Enhanced Proton Conductivity and Methanol Resistance for Direct Methanol Fuel Cells