Abstract:Chloride attack is one of the most severe durability problems for the marine concrete structures. The natural process of chloride ingress in concrete takes long time. Artificial environmental simulating tests were developed to shorten the testing duration. However, the control parameters of the artificial environment didn't have unique design principles. In this study, two types of accelerating test system and two exposure sites are adopted. These two systems had different wet-dry cycle intervals and belonged to Zhejiang University and Port and Airport Research Institute (PARI, Japan). The exposure sites were located in Hangzhou Bay Bridge and PARI respectively. A group of concrete specimens were put in those four places for accelerating testing and natural exposing. The chloride concentration distribution in each specimen was measured and the chloride resistance of the concrete under each environment was evaluated. Based on the testing results, the accelerating rate of the artificial environment to the practical exposure environment was discussed. In addition, the influence of the artificial environmental effects on the performance deterioration accelerating of the concrete was discussed. This study could be referred to design an ideal artificial environment accelerating tests. (C) 2011 Published by Elsevier Ltd.

Modification of Test Process of PERMIT Ion Migration Test and its Application to Determinate Effect of Methods to Improve Chloride Penetration Resistance of Cover Concrete

Improvement and Application of PERMIT Ion Migration Method for Determining Permeability of Concrete

Exploration of PERMIT Test for Determining Permeability of Concrete

EXPERIMENTAL STUDY AND CURRENT DEVELOPMENT OF PERMIT ION MIGRATION TEST

EXPERIMENTAL RESEARCH ON THE APPLICATION OF PERMIT ION MIGRATION TEST

Comparative Study On Testing Methods Of Chloride Ions Diffusion Coefficient In Concrete

Chloride Penetration in Surface-Treated Concrete in Natural and Accelerated Environments

Experimental Study On Permeability And Chloride Resistance Properties Of Concrete In Yu-Cheng Bridge

Research on factors affecting the results of in-situ chloride ion migration test for covercrete

Comparison of Chloride Penetration into Surface-Treated Concrete in Artificial and Natural Environments

Experimental research of an in-situ chloride migration test for covercrete

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

A New Test Method to Simulate Chloride Penetration into Concrete in Tidal Zone

Numerical Simulation of Chloride Penetration in Concrete in Rapid Chloride Migration Tests

TESTING METHOD FOR CHLORIDE-ION PERMEABILITY OF CONCRETE UNDER TENSILE LOAD

Bidirectional Electromigration of A Corrosion Inhibitor in Chloride Contaminated Concrete

Accelerating Tests For The Performance Deterioration Of Concrete Exposed To Chloride Media

Numerical Modeling Of The Effect Of Concrete Porosity Evolution On Electrochemical Chloride Removal From Concrete Structures

Influence of Initial Curing Conditions and Exposure Environments on Chloride Migration in Concrete Using Electrochemical Method

New Fast Test Method to Determine Chloride Depassivation Threshold of Rebar in Concrete

Experimental Research of Chloride Diffusion Coefficient in Concrete