Abstract:Metal ion coordinated GO/PMMA composites have been prepared by melt method. The interfacial interaction between the nanofiller and the polymer matrix is significantly increased due to the coordination bonding. As a result, the mechanical and thermal properties of the composites are highly improved. To study the property variation with the change of metal ions and preparation methods, two different metal ions (Cu(II) and Fe(III)) were added into the GO/PMMA system, respectively, and the composites were prepared by two different methods-the direct-melt method and the master-batch method. Fourier transform infrared spectroscopy (FTIR), Raman spectra, X-ray diffraction (XRD), scanning electron microscopy (SEM), tensile test, and thermogravimetic analysis (TGA) were performed to study the structures and properties of the composites. The FTIR results showed that GO and PMMA are successfully bridged via coordination bonding, for the characteristic peaks showed obvious blue shifts. Raman spectra indicated that coordination causes no extra defect to the GO sheets. SEM images showed that the GO sheets could be homogeneously dispersed in PMMA through master-batch method, while a poor dispersion through direct-melt method. From the tensile test results, it could be seen that the composites prepared by master-batch method had a better mechanical performance than those prepared by direct-melt method because of the different dispersion states. Fe(III)-coordinated composites have better mechanical performance than Cu(II)-coordinated composites do, due to the higher valence state of iron ions. The Young's modulus and tensile strength of Fe(III)-0.5 wt% GO/PMMA composite are 29.6% and 31.8%, respectively, higher than those of the composite with only GO, and 75.0% and 35.7%, respectively, higher than those of neat PMMA. The temperature of maximum weight loss of Fe(III)-0.5 wt% GO/PMMA is 26 degrees C higher than that of GO/PMMA, and 82 degrees C higher than that of neat PMMA. This metal ion coordination method is efficient and simple, and can easily bridge nanofillers and polymer matrixes containing polar groups. This approach opens up a new strategy for improving the performance of many kinds of nanocomposites.

Preparation and Mechanical Properties of Graphene Oxide/Pmma and Surface-Functionalized Graphene/Pmma Composites

Preparation of PMMA/Graphene Composites by In Situ Polymerization

Preparation of bioinspired graphene oxide/PMMA nanocomposite with improved mechanical properties

Preparation of Functionalized Graphene by Simultaneous Reduction and Surface Modification and Its Polymethyl Methacrylate Composites Through Latex Technology and Melt Blending

In Situ Polymerization Preparation and Mechanical Properties of Nanocomposites Based on PA10T/10I-block-PEG Copolymer and Graphene Oxide

Reinforcement of poly( methyl methacrylate) with surface-modified graphene oxide nanoribbon

Tuning the Interfacial Mechanical Behaviors of Monolayer Graphene/PMMA Nanocomposites.

Exfoliated Graphite Oxide Decorated by PDMAEMA Chains and Polymer Particles.

PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites

Solvent exfoliated graphene for reinforcement of PMMA composites prepared by in situ polymerization

Preparation and characterization of polymer/graphite oxide nanocomposites

Preparation and thermal properties of graphene oxide/MF composites

Preparation and Rheological Characterization of Poly(methyl Methacrylate)/functionalized Multi-Walled Carbon Nanotubes Composites

Enhanced Mechanical Properties and Thermal Stability of Psma by Functionalized Graphene Nanosheets

Non-covalent functionalization of graphene oxide by pyrene-block copolymers for enhancing physical properties of poly(methyl methacrylate)

Chemical Modification of Graphene with a Thermotropic Liquid Crystalline Polymer and Its Reinforcement Effect in the Polymer Matrix

Synthesis and characterization of functionalized graphene oxide/polyacrylamide nanocomposites using physical adsorbing and chemical grafting and their applications in polyimide matrix

Poly(amidoamine) Functionalized Graphene Oxide Incorporated Carbon/Epoxy Prepreg Composites for Enhanced Electrical and Thermal Properties

Facile fabrication of self-assembled PMMA/graphene oxide composite particles and their electroresponsive properties

Preparation of GO/PMMA Nanocomposites with Significantly Increased Properties through Metal Ion Coordination

High Mechanical Performance of Layered Graphene Oxide/poly(vinyl Alcohol) Nanocomposite Films.