Abstract:Silty soil is commonly utilized in construction or road foundations. One of the main geotechnical concerns associated with silty soil is its insufficient strength and susceptibility to liquefaction, which can lead to soil collapse under external loads or its own weight. In-situ chemical stabilization techniques, such as grouting, are favorable for enhancing the mechanical behavior of the soil. However, their application to silty soil is limited due to their low permeability. This study aims to develop a permeable polyurethane (PP) material for grouting to improve the mechanical properties of low-permeability silty soil. An orthogonal test was conducted to analyze the effects of injection pressure , dry density, water content, and curing time on the mechanical properties of silty soil after grouting (PU-SS). Comprehensive studies were carried out on the internal acoustic characteristics and surface deformation of the consolidated soil under uniaxial compression. Finally, considering the effect of water content on compressive strength,the damage constitutive model of consolidated was established. The results indicate that PP can increase the compressive strength of the silty soil up to 5 MPa. Water content emerges as the primary factor influencing the compressive strength of the consolidated soil, with a decrease in strength as water content increases. The digital surface deformation monitoring technique accurately captured the surface strain characteristics, revealing a relatively uniform surface strain distribution pre-peak stress. Subsequently, a deformation concentration zone formed, evolving into a localized deformation band, inducing shear slip along the fractured surface. The acoustic emission (AE) signal proved significant only during the damage stage. The established statistical damage model effectively characterizes the pre-yield and post-yield stages of consolidated soil, accounting for the influence of water content. In conclusion, the findings suggest that permeable polymer (PP) is more effective in improving the mechanical properties of low-permeability silty soil compared to grouting materials like cement, water glass, and silica sol. Expanding on these results, permeable polymers have potential applications in various areas, including preventing seepage and reinforcing soil embankments, strengthening highway subgrades, and fortifying building foundations.

Impact of PS on Permeability of Unsaturated Ruins Clay

SATURATION STRENGTH OF EARTHEN RUINS REINFORCED BY POTASSIUM SILICATE AND INFLUENCE OF ENVIRONMENTAL FACTORS ON REINFORCEMENT EFFECT

Effect of Traffic Load on Permeability of Remolded Kaolin

Effects of Pore-Size Distribution on the Gas Diffusion Coefficient and Gas Permeability of Compacted Manufactured Sand Tailing-Bentonite Mixtures

Experimental Study on the Time-Dependent Characteristics of MLPS Transparent Soil Strength

Field Tests of PS Infiltration for Unsaturated Earthen Sites

Performance evaluation and stabilization mechanism of red clay treated with polyurethane

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Cyclic stress-strain characteristics of red clay treated with permeable water-soluble polyurethane

Experimental Study on the Effect of Soil Saturation on the Electric Permeability Coefficient During Electroosmosis Process

Evolution of the anti-weathering characteristics of clay at earthen sites treated with K2SiO3 solutions: Micromechanism analysis based on SEM tests

Study on Preparation of Polymer-Modified Bentonite and Sand Mixtures Based on Osmotic Pressure Principle

Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane

Effects of natural zeolite and sulfate ions on the mechanical properties and microstructure of plastic concrete

Study on Mechanical Properties of Permeable Polymer Treated Loess

Study on Improving Loess Properties with Permeable Polymer Materials

Experimental Study of the Effect of Microstructure on the Permeability of Saturated Soft Clays

Study of the Influence of Clay Minerals on the Mechanical and Percolation Properties of Weakly Cemented Rocks

Hydrological response and crack resistance of polypropylene-fiber reinforced compacted steel slag-bentonite mixtures under wetting-drying cycles

Study on microscopic pores and physico-mechanical properties of red clay modified by calcium carbonate

Study on the Relationship between the Relative Molecular Mass of a Polymer Clay Stabilizer and the Permeability of a Tight Reservoir.