Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Bromomethylated Poly(2,6-Dimethyl-1,4-Phenylene Oxide) (Bppo)-Based Amphoteric Hollow-Fiber Membranes: Preparation and Lysozyme Adsorption

Studies on the Affinity Membrane for Adsorption and Purification of Lysozyme (ii) - Adsorption Characteristics of Metal Chelating Affinity Membranes for Lysozyme

Studies on the Affinity Membrane for Adsorption and Purification of Lysozyme(I) - Influence of Low-temperature Oxygen Plasma Treatment on Surface Structure and Adsorption Properties of the Affinity Membrane

Poly(olefin)-Based Anion Exchange Membranes Prepared Using Ziegler–Natta Polymerization

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Porous BPPO-based Membranes Modified by Aromatic Amine for Acid Recovery

Fundamental Studies Of A New Series Of Anion Exchange Membranes: Membranes Prepared From Bromomethylated Poly(2,6-Dimethyl-1,4-Phenylene Oxide) (Bppo) And Pyridine

Preparation of bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) hollow fiber cation-exchange membranes and immobilization of cellulase thereon

Adsorption and Activity of Lipase on Polyphosphazene-Modified Polypropylene Membrane Surface

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Hybrid anion exchange hollow fiber membranes through sol–gel process of different organic silanes within BPPO matrix

The Preparation of Metal–Organic‐Framework/Boron Phosphate Hybrid Materials for Improved Performances in Proton Exchange Membranes

Novel Hollow‐fiber Anion‐exchange Hybrid Membranes: Preparation and Characterization

Ethylene Vinyl Alcohol Copolymer Nanofibrous Cation Exchange Chromatographic Membranes with a Gradient Porous Structure for Lysozyme Separation

A Novel of Positively Charged Asymmetry Membrane Prepared from Poly (2,6-Dimethyl-1,4-phenylene Oxide) by in Situ Amination - Part Iii. Effect of Benzyl and Aryl Bromination Degrees of Polymer on Membrane Performance and Morphologies

One-pot Preparation of Anion Exchange Membranes from Bromomethylated Poly(2,6-Dimethyl-1,4-phenylene Oxide) for Electrodialysis

A Cross-Linked Fluorinated Poly (aryl Ether Oxadiazole) S Using a Thermal Cross-Linking for Anion Exchange Membranes

Cation exchange chromatography membrane of Poly(ethylene vinyl alcohol) nanofiber/sulfonated polystyrene microsphere composite for lysozyme isolation

Development of BPPO-based Anion Exchange Membranes for Electrodialysis Desalination Applications

Preparation and performance evaluation of novel alkaline stable anion exchange membranes