Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Adsorption and Activity of Lipase on Polyphosphazene-Modified Polypropylene Membrane Surface

Studies on the Affinity Membrane for Adsorption and Purification of Lysozyme(I) - Influence of Low-temperature Oxygen Plasma Treatment on Surface Structure and Adsorption Properties of the Affinity Membrane

Adsorption and activity of Candida rugosa lipase on polypropylene hollow fiber membrane modified with phospholipid analogous polymers.

Surface modification of polypropylene microporous membrane via self-assembly and UV-crosslinking of lecithin and analysis of surface properties

A comparative study on lipase immobilized polypropylene microfiltration membranes modified by sugar-containing polymer and polypeptide

Adsorption Immobilization of Candida Rugosa Lipases on Polypropylene Hollow Fiber Microfiltration Membranes Modified by Hydrophobic Polypeptides

Effect of Hydrophobic or Hydrophilic Performance of Membranes on Lipase Immobilization

Adsorption and activity of lipase from Candida rugosa on the chitosan-modified poly(acrylonitrile-co-maleic acid) membrane surface.

Immobilization of Lipase Onto Functional Cyclomatrix Polyphosphazene Microspheres

Protection of Opening Lids: Very High Catalytic Activity of Lipase Immobilized on Core-Shell Nanoparticles.

Modulation of the Adsorption and Activity of Protein/Enzyme on the Polypropylene Microporous Membrane Surface by Surface Modification

Characterization of an anion-exchange porous polypropylene hollow fiber membrane for immobilization of ABL lipase

Preparation of Coaxial-Electrospun Poly[bis(p-methylphenoxy)]phosphazene Nanofiber Membrane for Enzyme Immobilization

Immobilization Of Enzymes On A Phospholipid Bionically Modified Polysulfone Gradient-Pore Membrane For The Enhanced Performance Of Enzymatic Membrane Bioreactors

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Immobilization of Candida rugosa lipase on polypropylene microfiltration membrane modified by glycopolymer: hydrolysis of olive oil in biphasic bioreactor

Covalent Attachment of Phospholipid Analogous Polymers to Modify A Polymeric Membrane Surface: A Novel Approach

Immobilization and Properties of Lipase from Candida Rugosa on Electrospun Nanofibrous Membranes with Biomimetic Phospholipid Moities

Immobilization of Lipase on Chemically Modified Bimodal Ceramic Foams for Olive Oil Hydrolysis

Fabrication and Optimization of a Lipase Immobilized Enzymatic Membrane Bioreactor Based on Polysulfone Gradient-Pore Hollow Fiber Membrane

Entrusting Poly(Acrylonitrile-Co-Maleic Acid) Ultrafiltration Hollow Fiber Membranes with Biomimetic Surfaces for Lipase Immobilization