Abstract:In the context of Oxy-fuel combustion, there is a strong industrial interest in highly fuel-rich flames, characterized by an equivalence ratio (Φ) exceeding 2.5, for the production of H 2 -CO-rich synthesis gas. The validation of existing chemical reaction mechanisms for this specific regime pose a significant challenge due to the scarcity of experimental data for this particular range of equivalence ratio. The scope of this study was therefore the determination of the laminar burning velocity s L of ultra-rich CH 4 -O 2 flames under varying conditions, such as high equivalence ratios and preheating temperatures using the heat flux burner method. The laminar burning velocity was determined for equivalence ratio within the range of 2.3 < Φ < 3.6 and preheating temperature ranging from 300 K to 455 K. Additionally, the impact of the of reducing the oxygen content in the oxidizer on s L was investigated by argon addition in molar percentages ranging from 40 % to 100 %. The results of our study reveal laminar burning velocities ranging from 5 cm/s to 45 cm/s for pure oxy-fuel CH 4 flames. Preheating is shown to increase s L and this effect can be represented by a power law correlation s L = s L,0 (T/T 0 ) α with α = 1.53. Furthermore, the dilution of the oxidizer with argon leads to a significant decrease in s L of approximately 50 % compared to pure oxy-fuel flames. It is worth noting that detailed reaction mechanisms in combination with molecular transport data are typically not validated within the selected equivalence ratio range. To assess the performance of such reaction schemes in predicting laminar burning velocity under the specified selected conditions, we evaluated 13 different reaction mechanisms sourced from the literature. We compared the laminar burning velocities obtained through calculations of laminar premixed 1D flames and, additionally compared these with experimental data. A sensitivity analysis of the laminar burning velocity were carried out for selected mechanisms. Among the mechanisms, the CalTech2.3 mechanism exhibited the most consistent and accurate performance, particularly at high equivalence ratios.

STUDY ON THE LAMINAR BURNING VELOCITIES OF PREMIXED METHANE/AIR FLAMES NEAR THE LEAN FLAMMABILITY LIMIT

Laminar Burning Velocities And Markstein Lengths Of Premixed Methane/Air Flames Near The Lean Flammability Limit In Microgravity

Studies of Flame Structure in Microgravity

Extinction of Lean Near-Limit Methane/air Flames at Elevated Pressures under Normal- and Reduced-Gravity

Laminar Combustion Characteristics of Premixed Shale Gas and Air Flames

On Burner-Stabilized Cylindrical Premixed Flames in Microgravity

Extinction of near-limit premixed flames in microgravity

Microgravity Burner-Generated Spherical Diffusion Flames: Experiment and Computation

A numerical study of counterflow diffusion flames of methane/air at various pressures

Effects of radiation and compression on propagating spherical flames of methane/air mixtures near the lean flammability limit

Experimental and numerical investigations of the laminar burning velocities of premixed fuel-rich methane oxy-fuel and oxygen-enhanced flames

Experimental Investigation of Lean Methane–Air Laminar Premixed Flames at Engine-Relevant Temperatures

On the accuracy of laminar flame speeds measured from outwardly propagating spherical flames: Methane/air at normal temperature and pressure

Laminar Flame Speed of Methane/Air at Engine-Relevant Conditions: Performance of Different Mechanisms

Laminar burning Velocities, Markstein numbers and cellular instability of spherically propagation Ethane/Hydrogen/Air premixed flames at elevated pressures

On the transition modes and mechanisms for laminar to turbulent lifted jet diffusion flames at normal- and micro-gravity

Laminar Flame Speeds of Lean High-Hydrogen Syngas at Normal and Elevated Pressures

On Laminar Premixed Flame Propagating into Autoigniting Mixtures under Engine-Relevant Conditions

Buoyancy Effect on Extinction Limits in Low Strain Rate Counterflow Diffusion Flames of Methane

Outward Propagation, Burning Velocities, and Chemical Effects of Methane Flames Up to 60 ATM

Inert Gas Influence on Propagation Velocity of Methane-air Laminar Flames