Abstract:Damage detection algorithms employing the conventional acceleration measurements and the associated modal features may underperform due to the limited number of sensors used in the monitoring and the smoothing effect of spline functions used to increase the spatial resolution. The effectiveness of such algorithms could be increased if a more accurate estimate of mode shapes were provided. This study presents a hybrid structural health monitoring method for vibration-based damage detection of bridge-type structures. The proposed method is based on the fusion of data from conventional accelerometers and computer vision-based measurements. The most commonly used mode shape-based damage measures, namely, the mode shape curvature method, the modal strain energy method, and the modal flexibility method, are used for damage detection. The accuracy of these parameters used together with the conventional sparse sensor setups and the proposed hybrid approach is investigated in numerical case studies, with damage scenarios simulated on a simply-supported bridge. The simulations involve measuring the acceleration response of the bridge to ambient vibrations and train crossings and then processing the data to determine the modal frequencies and mode shapes. The efficiency and accuracy of the proposed hybrid health monitoring methodology are demonstrated in case studies involving scenarios in which conventional acceleration measurements fail to detect and locate damage. The robustness of the proposed method against various levels of noise is shown as well. In the studies considered, damage as small as 10% decrease in flexural stiffness of the bridge and localized in less than 1% of the span-length of the bridge is reliably detected even with very high levels of measurement noise. Finally, a modified modal flexibility damage parameter is derived and used to alleviate the shortcomings of the modal flexibility damage parameter.

Energy Damage Detection Strategy Based on Acceleration Responses for Long-Span Bridge Structures

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Vibration-Based Damage Detection Of Cable-Stayed Bridges

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Damage detection method for structures based on the relative variation of wavelet total energy

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Stayed-Cable Bridge Damage Detection and Localization Based on Accelerometer Health Monitoring Measurements

Vibration-based structural damage detection of long-span bridges

Damage Identification of Long-Span Bridges Based on the Correlation of Monitored Global Dynamic Responses in High Dimensional Space

Structural Damage Warning of a Long-Span Cable-Stayed Bridge Using Novelty Detection Technique Based on Wavelet Packet Analysis

Damage Identification of Long-Span Bridges Based on the Correlation of Probability Distribution of Monitored Quasi-Static Responses

Damage detection of bridge structures under moving loads based on CEEMD and PSD sensitivity analysis

A Hybrid Method for Vibration-Based Bridge Damage Detection

The tap-scan method for damage detection of bridge structures

Identifying Damage in Long-Span Self-Anchored Suspension Bridges Using Characteristic Indices

An Investigation into the Application of Acceleration Responses' Trendline for Bridge Damage Detection Using Quadratic Regression

Damage detection based on accelerometers and computer vision measurements of moving load-induced structural responses

Health monitoring of steel box girder bridges using non-contact sensors