Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In order to improve the path tracking performance and stability of intelligent vehicles during steering and collision avoidance working condition, an integrated control method combining four-wheel steering, active suspension and direct yaw-moment is proposed. Firstly, a unified chassis dynamics model with 18 degrees-of-freedom (DOF) is established, which includes steering, braking and suspension subsystems. Phase plane analysis results for both traditional 2-DOF bicycle model and the 18-DOF model are compared. The results show that although the uneven road has a certain influence on the phase portraits of sideslip angle and sideslip angular velocity of the 18-DOF model, the overall trend is consistent with those of the 2-DOF model. Secondly, a general control framework for steering and collision avoidance of autonomous vehicle is put forward, consisting of the steering control for path tracking, and active suspension and direct yaw-moment control for stability. The collision avoidance reference path is planned by the fifth-degree polynomial, and three types of steering control methods including optimal control front wheel steering, optimal control four-wheel steering and front wheel steering combined with feedforward and feedback control, are adopted for comparison. The main contribution of this paper is that the role of active suspension is considered in the path tracking and stability integrated control of intelligent vehicles under steering collision avoidance. The active suspension subsystem uses optimal control method by two different kinds of weight coefficients, which can be switched between "comfort mode" and "sport mode" based on the vehicle lateral acceleration. According to the phase portraits of vehicle center of gravity sideslip angle and sideslip angular velocity, the direct-yaw moment control system adopts proportional differential control method based on the distance from the state point to the stability boundary. Finally, simulations and comparative analysis are compared among four different control systems on high and low adhesion roads. The research results indicate that the integrated control system can improve the vehicle path tracking performance and stability significantly.

Model-Based Vehicle Trajectory and Its Properties for Automatic Steering Systems

Vehicle Dynamic Control Model and Electronic System

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

A high-performance neural network vehicle dynamics model for trajectory tracking control

Path tracking and stability integrated control of intelligent vehicles under steering collision avoidance

Train Trajectory-Following Control Method Using Virtual Sensors

Real-Time Yaw Rate Prediction Based on A Non-Linear Model and Feedback Compensation for Vehicle Dynamics Control

Robust trajectory tracking control for autonomous vehicle subject to velocity-varying and uncertain lateral disturbance

Model Predictive Control of Steering Torque in Shared Driving of Autonomous Vehicles.

Trajectory Tracking Control for Double-steering Automated Guided Vehicle Based on Model Predictive Control

Event-triggered model predictive-preview control strategy for trajectory tracking of autonomous vehicle

A model predictive control approach for angle tracking of steer‐by‐wire system with nonlinear transmission ratio

Tractor-implement dynamic trajectory model for automated navigation applications

Research on trajectory tracking and body attitude control of autonomous ground vehicle based on differential steering

Nonlinear model predictive control for trajectory-planning and tracking based on tilting technology to achieve vehicle obstacle avoidance

Two Nash-equilibrium-based steering control models for representing a driver’s interaction with vehicle automated steering

Adaptive Coordinated Path Tracking Control Strategy for Autonomous Vehicles with Direct Yaw Moment Control

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

Trajectory Tracking Control for Autonomous Driving Vehicle with Obstacle Avoidance: Modeling, Simulation, and Performance Analysis

Development of Trajectory Model for a Tractor-Implement System for Automated Navigation Applications

Establishment and comparison of a spatial dynamics model for virtual track train with different steering modes