Abstract:Dual-fuel combustion is an effective method to utilize methanol because of its high octane number and latent heat of evaporation. Two ways to use methanol are discussed. One is port-injected high reactivity fuel and directed-injected methanol, named as active-thermal atmosphere combustion (ATAC). The other is port-injected methanol and direct-injected high reactivity fuel, which is reactivity-controlled compression ignition (RCCI). In the current work, both methanol combustion modes were investigated in an optical engine. Several optically diagnostic methods were utilized to characterize flame features, including flame natural luminosity imaging, OH* natural luminosity imaging and two-color method by wavelength integration. Meantime, the chemical kinetics simulation was also combined to investigate the effects of active atmosphere and thermal atmosphere on methanol combustion. Results show that as for methanol ATAC, when the methanol is direct-injected during the low temperature heat release (LTHR) stage of n-heptane, it causes significant effects on the combustion phasing of the following high temperature heat release (HTHR). When the methanol is direct-injected during the HTHR stage of n-heptane, the single-peak HTHR turns to the double-peak HTHR. Besides, the yellow diffusion flame of methanol can also be observed. Affected by the in-cylinder vortex, the area and intensity of the OH* signal in the vortex squeeze zone are greater than those in the vortex stretch zone. The flame temperature of methanol maintains in 1800–2500 K at CA50 (the crank angle of 50% mixtures is burned completely), while the maximum KL factor maintains in 0.04–0.05. The thermal atmosphere created by the n-heptane combustion has the dominant effects on shortening the ignition delay of methanol. The effects of active atmosphere are limited. As for methanol/high reactivity fuel RCCI, because of the existence of homogeneous low reactivity methanol, the misfire condition occurs when the direct injection (DI) timing is late. With the DI timing of high reactivity fuel advancing, the combustion stability improves. But the flame development progress is mainly low-speed flame propagation, which results in long combustion duration. The combustion characteristics can be further improved by utilizing higher reactivity fuel, such as n-dodecane, specifically, the combustion phasing advances and the number of auto-ignition spots increases.

Experiment and Chemical Kinetics Analysis of Active Atmosphere with Different Fuels in HCCI Combustion

Effects of active species in residual gas on auto-ignition in a HCCI gasoline engine

Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine

Study on the Methanol/n-Heptane Duel Fuel Homogeneous Charge Compression Lgnition Combustion

Optical diagnostics and chemical kinetic analysis on the dual-fuel combustion of methanol and high reactivity fuels

Experimental Research on HCCI Using Gasoline and Diesel Blended Fuels

The Influence of Intake Pressure and Ethanol Addition to Gasoline on Single- and Dual-Stage Autoignition in an HCCI Engine

Modeling of HCCI combustion: From 0D to 3D

Effect of Hydrogen Addition on Methane Hcci Engine Ignition Timing and Emissions Using A Multi-Zone Model

Experimental Study and Chemical Analysis of N-Heptane Homogeneous Charge Compression Ignition Combustion with Port Injection of Reaction Inhibitors

Numerical Investigation on the Application of Catalytic Combustion to HCCI Engines

LES/TPDF Investigation of the Effects of Ambient Methanol Concentration on Pilot Fuel Ignition Characteristics and Reaction Front Structures

Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine

Ignition and combustion inhibition of n-heptane homogenous charge compression ignition (HCCI) combustion by methanol additive

Study of HCCI Combustion Characteristics with High RON Fuel

Heat Release Analysis on Combustion and Parametric Study on Emissions of Hcci Engines Fueled with 2-Propanol/n-heptane Blend Fuels

Detailed Chemical Kinetic Simulation of Natural Gas HCCI Combustion: Gas Composition Effects and Investigation of Control Strategies

Effects of fuel combination and IVO timing on combustion and emissions of a dual-fuel HCCI combustion engine

Study on HCCI of Methanol by Rapid Compression Machine

Numerical Study on the Effects of CO2 and H2 on Combustion in a Dimethyl Ether HCCI Engine

Influences of catalytic combustion on the ignition timing and emissions of HCCI engines