Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

Experimental Research on High Load Extension of HCCI Combustion Using Gasoline and Methanol Stratification

Experimental study of fuel stratification for HCCI high load extension

Numerical Study of Charge Stratification on Load Extension of Gasoline HCCI

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Numerical study of stratification on HCCI combustion for higher load extension

Research on Emission Characteristics of Methanol-Gasoline Blend Direct Injection HCCI Combustion

Potential of High Load Extension for Gasoline Hcci Engine Using Boosting and Exhaust Gas Recirculation

OS-C3: Numerical Study of Stratification on HCCI Combustion for Higher Load Extension(OS-C the Role of Heterogeneity of Mixture on HCCI and PCCI Combustion,Organized Session Papers)

Experimental Research on HCCI Using Gasoline and Diesel Blended Fuels

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

External EGR Combined with Internal EGR for High Load Extension on a Gasoline HCCI Engine

Effects of Injection Parameters and EHN Mixing on the Combustion Characteristics of Fueling Pure Methanol in a Compression Ignition Engine

Experimental Research on the Effects of Exhaust Gas Recirculation Strategy on Stoichiometric Spark Induced Compression Ignition Combustion

Extension of the Lower Load Limit in Dieseline Compression Ignition Mode

Extending HCCI High Load Operation of Gasoline Engine by Intake Boosting

Effects of spark ignition and stratified charge on gasoline HCCI combustion with direct injection

Experimental study on combustion and emission characteristics of ethanol-gasoline blends in a high compression ratio SI engine

Experimental study on effects of pilot injection strategy on combustion and emission characteristics of diesel/methanol dual-fuel engine under low load

Parametric study on effects of excess air/fuel ratio, spark timing, and methanol injection timing on combustion characteristics and performance of natural gas/methanol dual-fuel engine at low loads

Experimental and Computational Studies on Gasoline HCCI Combustion Control Using Injection Strategies

Experimental and numerical study on a SI engine fueled with gasohol and dissociated methanol gas blends at lean conditions