Advanced Treatment of Printed Circuit Board Wastewater by Aerated Biological Filter
Yubin Liu,Xiaojun Wang,Zhicong Huang,Wenlong Zhou
DOI: https://doi.org/10.3969/j.issn.1005-829x.2012.05.005
2010-01-01
Abstract:The biological aerated filter(BAF) process is applied in advanced treatment of printed circuit board(PCB) wastewater in Taihu area.The results show that under the conditions of the average influent mass concentration of COD,NH3-N and Cu is 198.9 mg/L,20.1 mg/L and 1.09 mg/L,respectively,the inflow discharge of wastewater is 0.5 m3/h,and the volume ratio of gas to water is 5∶1,the average effluent mass concentration of COD,NH3-N and Cu is 23.2 mg/L,1.56 mg/L and 0.098 mg/L.The effluent quality is for below the discharge standard of Taihu area.The cost of wastewater treatment is about 0.2 RMB/t.To avoid from being plugged up and accumulation of Cu,BAF should be backwashed 15 days a time.