Abstract:In hot and humid tropical countries, the air-conditioning system has a high energy usage in commercial buildings. This study introduces a static balance duct design method for a temperature dependent variable air volume system. Ducts are looped together, which cause the air to self-balance and minimize the pressure loss across the duct network. The static balance duct network can easily identify the critical zone of highest pressure loss. This zone appears at the longest duct length from the air source and is always consistent for different load conditions. The air supplied to this critical zone is controlled by the zone temperature sensor, which directs feedback to the variable frequency drive fan of the air-handling unit. The rest of the variable air volume terminal units are zone temperature controlled. The duct looping design mitigates the problems in pressure variations and complements the temperature dependent control strategy. An open office case study is carried out to demonstrate the merit of the static balance duct design method. An actual installation was completed in a shopping mall. The recorded temperature readings verified that the static balance duct network and temperature dependent variable air volume air-conditioning system is operational and functional. Approximately 27% energy savings is achieved compared to the constant air volume system. Practical application: The static balance duct design method is a combination of equal friction duct design method and a loop duct network. This static balance duct network can identify the critical zone of highest pressure loss and this zone is always consistent. In this temperature-dependent variable air volume (TDVAV), the variable air volume (VAV) terminal unit at the critical zone is eliminated. The zone temperature sensor at the critical zone provides direct feedback to the variable frequency drive fan. All other terminal units are temperature dependent. The static balance TDVAV system enhances energy savings, improves the performance of VAV system and reduces the faults for VAV systems.

Minimum Airflow Reset of Single Duct Vav Terminal Boxes

Optimization of Ventilation System Operation in Office Environment Using Pod Model Reduction and Genetic Algorithm

Developing a Control Strategy for Minimum Airflow Setting Considering CO2 Level and Energy Consumption in a Variable Air Volume System

Design of Terminal Controller of Vav Air-Conditioning System Based on Bas3000 Ddc

Minimum Airflow Rate Algorithm for VAV Systems

Research on Regulation Method of Variable-Air-Volume Air Conditioning System with "Personal Space"

A Proactive Fault Detection and Diagnosis Method for Variable-Air-volume Terminals in Building Air Conditioning Systems

Demand Controlled Ventilation Strategies for High Indoor Air Quality and Low Heating Energy Demand

Online reset strategy based on linear correlation for variable static pressure control of VAV system

Static balance duct design method and temperature dependent variable air volume systems

Evaluation of Four Control Strategies for Building VAV Air-Conditioning Systems

Performance Simulation and Analysis of Occupancy-Based Control for Office Buildings with Variable-Air-Volume Systems

The Prediction-Based Control Strategy with Terminal-Reheating for Variable Air Volume Systems

Smart air supply terminal for floor-standing room air conditioners based on the identification of human positions

Development of Temperature Controllers for a Room Deploying the Displacement Ventilation for Heating, Ventilating, and Air-Conditioning

Development of Controllers for Temperature Control of a Room Deploying the Displacement Ventilation HVAC System

Experimental Investigation on Indoor Environment and Energy Performance of Convective Terminals

A hierarchical HVAC optimal control method for reducing energy consumption and improving indoor air quality incorporating soft Actor-Critic and hybrid search optimization

Study on Characteristics and Optimal Control of Terminal-reheat for Multi-zone VAV Air-conditioning Systems

A Novel Data-Driven Air Balancing Method with Energy-Saving Constraint Strategy to Minimize the Energy Consumption of Ventilation System

Optimal and Fault Tolerant Control of Supply Air Temperature in VAV Systems