Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

Pseudo-Dynamic Test of Steel Frames with Semi-Rigid Connections

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

The Effect of Joint Stiffness on Static Capability of Multistory Steel Frames

Effect of Joint Stiffness on Dynamic Behaviors and Seismic Properties of Two-Dimensional Multistory Steel Frames

Effects of Joint's Rigidity on the Capacity of Gabled Frames

An Investigation of the Effect of Semi-rigid Connections on Sudden Column Removal in Steel Frames

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Study on Dynamic Characteristics of Semi-rigid Steel Frames

Experimental Study of Semirigid End-Plate Connections in Multi-Story Steel Frames

Elastic Time-history Analysis of Multi-story Steel Frame with Semirigid End-plate Conections in Earthquake Response

Nonlinear Finite Element Analysis of Dynamic Characteristics of Semi-rigid Frames with Concrete-filled Steel Tubular Columns

An Analysis of the Design of Multistory Steel Frames with Semirigid End-Plate Connections

Finite Element Analysis for Behavior of Semi-rigid-connected Steel Frames

Numerical Simulation and Experimental Analysis on Steel Semi-Rigid Joints

Push-over Analysis of Multistory Steel Frame with Semirigid End-plate Conections

Pseudo-static test on stainless steel frame with high-strength bolted extended endplate joint

Effects of Semi-rigid Joints of Steel Frames on Natural Vibration Period of Structures