Abstract:Preparation process of core‐shell structure ABS core‐shell impact modifier based on agglomerate technologies. Particle size distribution and the compatibility of core‐shell impact modifiers play a crucial role in determining the mechanical properties of the resin. This study presents the synthesis of a core‐shell impact modifier, a copolymer of polybutadiene grafted with styrene and acrylonitrile (PBL‐g‐SAN), using emulsion polymerization to enhance the mechanical properties of SAN resin. Polymer agglomeration technologies were employed to increase the particle size of polybutadiene latex, resulting in particles approximately 300 nm in diameter. Moreover, the effects of core‐shell modifiers with different constitutions on the mechanical properties of ABS resin were investigated. By optimizing the grafting polymerization process, improvements in impact strength of ABS resin were observed. When the St/AN ratio of the core‐shell modifier is 75/25, with a core‐shell ratio of 60/40 and MMA content at 2.5%, the impact strength of ABS resin reaches its peak while maintaining high tensile strength. The incorporation of methyl methacrylate improved the dispersion of core‐shell modifiers in SAN resin. Compared to commercial ABS resins with the same SAN and rubber content, the modified resin demonstrated a nearly 20% improvement in impact performance, and significant reductions in both production time and costs due to the polymer agglomeration method. Highlights The 300 nm polybutadiene latex was synthesized by polymer agglomeration technology. The relationship between the composition of these core‐shell modifiers and the mechanical properties of ABS resin was explored. The ABS resin with impact strength exceeding 20% of commercial material is prepared.

Effect of Acrylate Toughening Agent on the Impact and Fusion Characteristics of PVC

Synthesis of ACR Impact Modifier with PVC Shell and Its Toughening Efficiency on PVC

PREPARATION AND CHARACTERISTICS OF PBA/PMMA CORE-SHELL PARTICLES AS TOUGHER

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Study on the fusion properties of extruded foaming rigid PVC

Influence of the Rubber Crosslinking Density of A Core-Shell Structure Modifier on the Properties of Toughened Poly(Methyl Methacrylate)

The Effect of Core–Shell Ratio of Acrylic Impact Modifier on Toughening PLA

Modification of Poly(vinyl Chloride) with Nano-CaCO3 Coated with Poly(methyl Methacrylate)

Effect of Epoxy-Functionalised Core-Shell Particles on Properties of Poly(Butylenes Terephthalate) (Pbt)

Influence of Core-Shell Particles Structure on the Morphology and Brittle-Ductile Transition of Pbt/Abs-G-Gma Blends

Influences of individual and composed poly(vinyl alcohol) suspending agents on particle morphology of suspension poly(vinyl chloride) resin

Effect of Reactive Group Types on the Properties of Core-Shell Modifiers Toughened PA6

Compatibilizing and toughening of the styrene and acrylonitrile copolymer and core‐shell impact modifier obtained by agglomerate technologies

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

EFFECT OF RUBBER AND INORGANIC RIGID PARTICLES ON FRACTURE BEHAVIOR OF INJECTION-MOLDED PVC NANOCOMPOSITES

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)

Preparation and Properties of PMMA Blends with High Toughness

Effect of Matrix Composition on the Fracture Behavior of Rubber-Modified Pmma/Pvc Blends

Effect of PBT Resin on the Structure and Properties of Core-Shell Particles Toughened PC